Message-ID: <3b215d83-9b8e-d881-44c4-ee1301bb9044@linaro.org>
Date:   Fri, 10 Feb 2023 14:48:38 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.4.2
Subject: Re: [PATCH v1 2/4] thermal: qoriq: add i.MX93 TMU support
Content-Language: en-US
To:     "Alice Guo (OSS)" <alice.guo@oss.nxp.com>, rafael@kernel.org,
        amitk@kernel.org, rui.zhang@intel.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
        s.hauer@pengutronix.de, festevam@gmail.com
Cc:     linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-imx@nxp.com
References: <20230105101748.6714-1-alice.guo@oss.nxp.com>
 <20230105101748.6714-3-alice.guo@oss.nxp.com>
From:   Daniel Lezcano <daniel.lezcano@linaro.org>
In-Reply-To: <20230105101748.6714-3-alice.guo@oss.nxp.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 05/01/2023 11:17, Alice Guo (OSS) wrote:
> From: Alice Guo <alice.guo@nxp.com>
> 
> The procedure to program the calibration table of i.MX93 TMU:
> 1. disable monitoring mode
> 2. configure TCMCFG
> 3. write TTCFGR with TTCFGR[CAL_PT] = n
> 4. write TSCFGR with the sensor value of the calibration point n
> 5. write TTRCRn associated with the calibration point n
> Need to repeat steps 3—5 for all calibration points from the calibration
> table provided by the TMU device node.
> 
> When TRITSR[V] = 1 and TRITSR[TP5] = 1, need to add 0.5K to
> TRITSR[TEMP].
> 
> IPBRR0s of lx2160ardb, lx2162aqds and i.MX93 have the same value
> 0x01900201 so that use the compatible to determine whether the current
> TMU belongs to i.MX93 or not.
> 
> Signed-off-by: Alice Guo <alice.guo@nxp.com>
> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> Reviewed-by: Ye Li <ye.li@nxp.com>
> Acked-by: Jason Liu <jason.hui.liu@nxp.com>
> ---

[ ... ]

> @@ -369,6 +416,7 @@ static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
>   static const struct of_device_id qoriq_tmu_match[] = {
>   	{ .compatible = "fsl,qoriq-tmu", },
>   	{ .compatible = "fsl,imx8mq-tmu", },
> +	{ .compatible = "fsl,imx93-tmu", },
>   	{},

Now that you have more than 2, I suggest the pass a ops structure to 
.data, so you can call them directly instead of checking the TMU version 
in the calibration, the initialization and get the temperature.

>   };
>   MODULE_DEVICE_TABLE(of, qoriq_tmu_match);

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog