Message-ID: <a0dce9eb-8153-3505-e0f0-40921e69b97b@linaro.org>
Date:   Fri, 10 Feb 2023 16:19:27 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.7.1
Subject: Re: [PATCH v2 06/11] arm64: dts: qcom: sm8450: add port subnodes in
 dwc3 node
Content-Language: en-US
To:     Neil Armstrong <neil.armstrong@linaro.org>,
        Heikki Krogerus <heikki.krogerus@linux.intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will@kernel.org>
Cc:     linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
References: <20230130-topic-sm8450-upstream-pmic-glink-v2-0-71fea256474f@linaro.org>
 <20230130-topic-sm8450-upstream-pmic-glink-v2-6-71fea256474f@linaro.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230130-topic-sm8450-upstream-pmic-glink-v2-6-71fea256474f@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 10.02.2023 16:02, Neil Armstrong wrote:
> Add ports subnodes in dwc3 node to avoid repeating the
> same description in each board DT.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 1a744a33bcf4..ccda73426ee2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -4155,6 +4155,25 @@ usb_1_dwc3: usb@a600000 {
>  				snps,dis_enblslpm_quirk;
>  				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
>  				phy-names = "usb2-phy", "usb3-phy";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +
> +						usb_1_dwc3_hs: endpoint {
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +
> +						usb_1_dwc3_ss: endpoint {
> +						};
> +					};
> +				};
>  			};
>  		};
>  
>