From:   =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= <michal.vokac@ysoft.com>
To:     Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= <michal.vokac@ysoft.com>
Subject: [PATCH 3/6] ARM: dts: imx6dl-yapp4: Use reset-gpios property name
Date:   Fri, 10 Feb 2023 16:48:52 +0100
Message-Id: <20230210154855.3086900-4-michal.vokac@ysoft.com>
In-Reply-To: <20230210154855.3086900-1-michal.vokac@ysoft.com>
References: <20230210154855.3086900-1-michal.vokac@ysoft.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use the gpios instead of gpio suffix that is mandated by the binding.
This dtbs_check warning is fixed now:

  touchscreen@5c: Unevaluated properties are not allowed ('reset-gpio' was unexpected)

The reset signal worked correctly as both the "gpio" and "gpios" suffixes
are actually allowed by the gpiolib.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index aacbf317feea..c6afc51bb22b 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -313,7 +313,7 @@ touchscreen: touchscreen@5c {
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
 		status = "disabled";
-- 
2.25.1