From:   arinc9.unal@gmail.com
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
Cc:     =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org,
        Frank Wunderlich <frank-w@public-files.de>,
        erkin.bozoglu@xeront.com
Subject: [PATCH v3 3/5] arm: dts: mt7623: change mt7530 switch address
Date:   Fri, 10 Feb 2023 21:25:03 +0300
Message-Id: <20230210182505.24597-4-arinc.unal@arinc9.com>
In-Reply-To: <20230210182505.24597-1-arinc.unal@arinc9.com>
References: <20230210182505.24597-1-arinc.unal@arinc9.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Arınç ÜNAL <arinc.unal@arinc9.com>

In the case of muxing phy0 of the MT7530 switch, the switch and the phy
will have the same address on the mdio bus, 0. This causes the ethernet
driver to fail since devices on the mdio bus cannot share an address.

Any address can be used for the switch, therefore, change the switch
address to 0x1f.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 arch/arm/boot/dts/mt7623a.dtsi                | 4 ++--
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 ++--
 arch/arm/boot/dts/mt7623n-rfb-emmc.dts        | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index fbb5731a3a53..dd522e508eb3 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -36,9 +36,9 @@ mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch0: switch@0 {
+		switch0: switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			mediatek,mcm;
 			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
 			reset-names = "mcm";
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 1e03a3de654f..dc9b4f99eb8b 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -189,9 +189,9 @@ mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			reset-gpios = <&pio 33 0>;
 			core-supply = <&mt6323_vpa_reg>;
 			io-supply = <&mt6323_vemc3v3_reg>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 5e328c2a6a6e..6b0c3d1006ab 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -185,9 +185,9 @@ phy5: ethernet-phy@5 {
 			phy-mode = "rgmii-rxid";
 		};
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			reset-gpios = <&pio 33 0>;
 			core-supply = <&mt6323_vpa_reg>;
 			io-supply = <&mt6323_vemc3v3_reg>;
-- 
2.37.2