From:   arinc9.unal@gmail.com
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
Cc:     =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org,
        Frank Wunderlich <frank-w@public-files.de>,
        erkin.bozoglu@xeront.com
Subject: [PATCH v3 4/5] arm: dts: mt7623: enable flow control on port@6
Date:   Fri, 10 Feb 2023 21:25:04 +0300
Message-Id: <20230210182505.24597-5-arinc.unal@arinc9.com>
In-Reply-To: <20230210182505.24597-1-arinc.unal@arinc9.com>
References: <20230210182505.24597-1-arinc.unal@arinc9.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Arınç ÜNAL <arinc.unal@arinc9.com>

Flow control needs to be enabled on both sides to work.
It is already enabled on gmac0, enable it on port@6 too.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 arch/arm/boot/dts/mt7623a.dtsi         | 1 +
 arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index dd522e508eb3..2a50b5c0c933 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -88,6 +88,7 @@ port@6 {
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 6b0c3d1006ab..34994f3f5a4b 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -230,6 +230,7 @@ port@6 {
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
-- 
2.37.2