From:   Melody Olvera <quic_molvera@quicinc.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Jassi Brar <jassisinghbrar@gmail.com>,
        Mathieu Poirier <mathieu.poirier@linaro.org>,
        Robert Marko <robimarko@gmail.com>,
        Guru Das Srinagesh <quic_gurus@quicinc.com>
CC:     Konrad Dybcio <konrad.dybcio@linaro.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        Melody Olvera <quic_molvera@quicinc.com>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-remoteproc@vger.kernel.org>
Subject: [PATCH 7/9] remoteproc: qcom: q6v5: Add support for q6 rmb registers
Date:   Mon, 13 Feb 2023 10:52:16 -0800
Message-ID: <20230213185218.166520-8-quic_molvera@quicinc.com>
In-Reply-To: <20230213185218.166520-1-quic_molvera@quicinc.com>
References: <20230213185218.166520-1-quic_molvera@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

When attaching a running Q6, the remoteproc driver needs a way
to communicate with the Q6 using rmb registers, so allow the
rmb register to be gotten from the device tree if present.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5.c | 9 +++++++++
 drivers/remoteproc/qcom_q6v5.h | 8 ++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 192c7aa0e39e..e8c6be70ebfd 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -254,6 +254,7 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 		   void (*handover)(struct qcom_q6v5 *q6v5))
 {
 	int ret;
+	struct resource *res;
 
 	q6v5->rproc = rproc;
 	q6v5->dev = &pdev->dev;
@@ -263,6 +264,14 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 	init_completion(&q6v5->start_done);
 	init_completion(&q6v5->stop_done);
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		q6v5->rmb_base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(q6v5->rmb_base))
+			q6v5->rmb_base = NULL;
+	} else
+		q6v5->rmb_base = NULL;
+
 	q6v5->wdog_irq = platform_get_irq_byname(pdev, "wdog");
 	if (q6v5->wdog_irq < 0)
 		return q6v5->wdog_irq;
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
index 5a859c41896e..95824d5b64ce 100644
--- a/drivers/remoteproc/qcom_q6v5.h
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -7,6 +7,12 @@
 #include <linux/completion.h>
 #include <linux/soc/qcom/qcom_aoss.h>
 
+#define RMB_BOOT_WAIT_REG 0x8
+#define RMB_BOOT_CONT_REG 0xC
+#define RMB_Q6_BOOT_STATUS_REG 0x10
+
+#define RMB_POLL_MAX_TIMES 250
+
 struct icc_path;
 struct rproc;
 struct qcom_smem_state;
@@ -16,6 +22,8 @@ struct qcom_q6v5 {
 	struct device *dev;
 	struct rproc *rproc;
 
+	void __iomem *rmb_base;
+
 	struct qcom_smem_state *state;
 	struct qmp *qmp;
 
-- 
2.25.1