From:   Bjorn Andersson <andersson@kernel.org>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc:     linux-kernel@vger.kernel.org, Patrick Wildt <patrick@blueri.se>,
        konrad.dybcio@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
Date:   Mon, 13 Feb 2023 14:23:05 -0800
Message-Id: <167632698311.557014.4879316622036717594.b4-ty@kernel.org>
In-Reply-To: <20230213090118.11527-1-manivannan.sadhasivam@linaro.org>
References: <20230213090118.11527-1-manivannan.sadhasivam@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk

On Mon, 13 Feb 2023 14:31:18 +0530, Manivannan Sadhasivam wrote:
> Nodes like pwrkey, resin, iadc, adc-tm, temp-alarm which are the grand
> children of spmi_bus node represent the interrupt generating devices but
> don't have "interrupt-parent" property.
> 
> As per the devicetree spec v0.3, section 2.4:
> 
> "The physical wiring of an interrupt source to an interrupt controller is
> represented in the devicetree with the interrupt-parent property. Nodes
> that represent interrupt-generating devices contain an interrupt-parent
> property which has a phandle value that points to the device to which the
> device’s interrupts are routed, typically an interrupt controller. If an
> interrupt-generating device does not have an interrupt-parent property,
> its interrupt parent is assumed to be its devicetree parent."
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
      commit: 2d5cab9232ba6bac734186f3e74fb106793bc738

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>