From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     andersson@kernel.org
Cc:     konrad.dybcio@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        viresh.kumar@linaro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [RESEND PATCH 06/12] arm64: dts: qcom: qdu1000: Supply clock from cpufreq node to CPUs
Date:   Wed, 15 Feb 2023 12:33:54 +0530
Message-Id: <20230215070400.5901-7-manivannan.sadhasivam@linaro.org>
In-Reply-To: <20230215070400.5901-1-manivannan.sadhasivam@linaro.org>
References: <20230215070400.5901-1-manivannan.sadhasivam@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.

So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index f234159d2060..98a859ad5229 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -27,6 +27,7 @@ CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
@@ -45,6 +46,7 @@ CPU1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
@@ -60,6 +62,7 @@ CPU2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
@@ -75,6 +78,7 @@ CPU3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
@@ -1312,6 +1316,7 @@ cpufreq_hw: cpufreq@17d90000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		gem_noc: interconnect@19100000 {
-- 
2.25.1