From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     andersson@kernel.org
Cc:     konrad.dybcio@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        viresh.kumar@linaro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [RESEND PATCH 11/12] arm64: dts: qcom: sm6375: Supply clock from cpufreq node to CPUs
Date:   Wed, 15 Feb 2023 12:33:59 +0530
Message-Id: <20230215070400.5901-12-manivannan.sadhasivam@linaro.org>
In-Reply-To: <20230215070400.5901-1-manivannan.sadhasivam@linaro.org>
References: <20230215070400.5901-1-manivannan.sadhasivam@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.

So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6375.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 31b88c738510..58d3b4785401 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -39,6 +39,7 @@ CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -58,6 +59,7 @@ CPU1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -74,6 +76,7 @@ CPU2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -90,6 +93,7 @@ CPU3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -106,6 +110,7 @@ CPU4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -122,6 +127,7 @@ CPU5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -139,6 +145,7 @@ CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -155,6 +162,7 @@ CPU7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -1383,6 +1391,7 @@ cpufreq_hw: cpufreq@fd91000 {
 				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};
 
-- 
2.25.1