From:   Sasha Levin <sashal@kernel.org>
To:     linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc:     Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Patrice Chotard <patrice.chotard@foss.st.com>,
        Sasha Levin <sashal@kernel.org>, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 17/24] ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
Date:   Wed, 15 Feb 2023 15:45:40 -0500
Message-Id: <20230215204547.2760761-17-sashal@kernel.org>
In-Reply-To: <20230215204547.2760761-1-sashal@kernel.org>
References: <20230215204547.2760761-1-sashal@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 4722dd4029c63f10414ffd8d3ffdd6c748391cd7 ]

According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d47..d52a7aaa10743 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -178,7 +178,7 @@ tsin0: port {
 				tsin-num = <0>;
 				serial-not-parallel;
 				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
 				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
-- 
2.39.0