Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
MIME-Version: 1.0
From:   Rob Herring <robh@kernel.org>
To:     Mike Looijmans <mike.looijmans@topic.nl>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        Jonathan Cameron <jic23@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-iio@vger.kernel.org
In-Reply-To: <20230217093128.8344-1-mike.looijmans@topic.nl>
References: <20230217093128.8344-1-mike.looijmans@topic.nl>
Message-Id: <167664119704.650159.16760653306114793445.robh@kernel.org>
Subject: Re: [PATCH 1/2] dt-bindings: iio: adc: Add driver for TI ADS1100
 and ADS1000
Date:   Fri, 17 Feb 2023 07:47:00 -0600
Precedence: bulk


On Fri, 17 Feb 2023 10:31:27 +0100, Mike Looijmans wrote:
> The ADS1100 is a 16-bit ADC (at 8 samples per second).
> The ADS1000 is similar, but has a fixed data rate.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> 
> ---
> 
>  .../bindings/iio/adc/ti,ads1100.yaml          | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads1100.example.dtb: adc@49: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230217093128.8344-1-mike.looijmans@topic.nl

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.