From:   Angel Iglesias <ang.iglesiasg@gmail.com>
To:     linux-iio@vger.kernel.org
Cc:     Angel Iglesias <ang.iglesiasg@gmail.com>,
        Jonathan Cameron <jic23@kernel.org>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Alexandru Lazar <alazar@startmail.com>,
        Andreas Klinger <ak@it-klinger.de>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/7] iio: pressure: bmp280: Make read calibration callback optional
Date:   Sun, 19 Feb 2023 17:58:01 +0100
Message-Id: <bb1b95ab3f4e71d3c76543370325c5c9aaa07add.1676823250.git.ang.iglesiasg@gmail.com>
In-Reply-To: <cover.1676823250.git.ang.iglesiasg@gmail.com>
References: <cover.1676823250.git.ang.iglesiasg@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Newer models do not require read the calibration parameters and apply the
compensation algorithms in the sensor.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 6467034b1d3e..22addaaa5393 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1631,10 +1631,12 @@ int bmp280_common_probe(struct device *dev,
 	 * time once. They will not change.
 	 */
 
-	ret = data->chip_info->read_calib(data);
-	if (ret < 0)
-		return dev_err_probe(data->dev, ret,
-				     "failed to read calibration coefficients\n");
+	if (data->chip_info->read_calib) {
+		ret = data->chip_info->read_calib(data);
+		if (ret < 0)
+			return dev_err_probe(data->dev, ret,
+					     "failed to read calibration coefficients\n");
+	}
 
 	/*
 	 * Attempt to grab an optional EOC IRQ - only the BMP085 has this
-- 
2.39.2