From:   Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
To:     Lee Jones <lee@kernel.org>
Cc:     Andrew Lunn <andrew@lunn.ch>, linux-kernel@vger.kernel.org,
        linux@ew.tq-group.com,
        Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Subject: [PATCH v2 3/3] mfd: tqmx86: correct board names for TQMxE39x
Date:   Mon, 20 Feb 2023 12:25:46 +0100
Message-Id: <aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com>
In-Reply-To: <e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com>
References: <e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:

- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID

The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.

Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---

Notes:
    v2: add Reviewed-by from v1

 drivers/mfd/tqmx86.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index 958334f14eb00..fac02875fe7d9 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -30,9 +30,9 @@
 #define TQMX86_REG_BOARD_ID_50UC	2
 #define TQMX86_REG_BOARD_ID_E38C	3
 #define TQMX86_REG_BOARD_ID_60EB	4
-#define TQMX86_REG_BOARD_ID_E39M	5
-#define TQMX86_REG_BOARD_ID_E39C	6
-#define TQMX86_REG_BOARD_ID_E39x	7
+#define TQMX86_REG_BOARD_ID_E39MS	5
+#define TQMX86_REG_BOARD_ID_E39C1	6
+#define TQMX86_REG_BOARD_ID_E39C2	7
 #define TQMX86_REG_BOARD_ID_70EB	8
 #define TQMX86_REG_BOARD_ID_80UC	9
 #define TQMX86_REG_BOARD_ID_110EB	11
@@ -48,6 +48,7 @@
 #define TQMX86_REG_IO_EXT_INT_12		3
 #define TQMX86_REG_IO_EXT_INT_MASK		0x3
 #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT	4
+#define TQMX86_REG_SAUC		0x17
 
 #define TQMX86_REG_I2C_DETECT	0x1a7
 #define TQMX86_REG_I2C_DETECT_SOFT		0xa5
@@ -110,7 +111,7 @@ static const struct mfd_cell tqmx86_devs[] = {
 	},
 };
 
-static const char *tqmx86_board_id_to_name(u8 board_id)
+static const char *tqmx86_board_id_to_name(u8 board_id, u8 sauc)
 {
 	switch (board_id) {
 	case TQMX86_REG_BOARD_ID_E38M:
@@ -121,12 +122,12 @@ static const char *tqmx86_board_id_to_name(u8 board_id)
 		return "TQMxE38C";
 	case TQMX86_REG_BOARD_ID_60EB:
 		return "TQMx60EB";
-	case TQMX86_REG_BOARD_ID_E39M:
-		return "TQMxE39M";
-	case TQMX86_REG_BOARD_ID_E39C:
-		return "TQMxE39C";
-	case TQMX86_REG_BOARD_ID_E39x:
-		return "TQMxE39x";
+	case TQMX86_REG_BOARD_ID_E39MS:
+		return (sauc == 0xff) ? "TQMxE39M" : "TQMxE39S";
+	case TQMX86_REG_BOARD_ID_E39C1:
+		return "TQMxE39C1";
+	case TQMX86_REG_BOARD_ID_E39C2:
+		return "TQMxE39C2";
 	case TQMX86_REG_BOARD_ID_70EB:
 		return "TQMx70EB";
 	case TQMX86_REG_BOARD_ID_80UC:
@@ -159,9 +160,9 @@ static int tqmx86_board_id_to_clk_rate(struct device *dev, u8 board_id)
 	case TQMX86_REG_BOARD_ID_E40C1:
 	case TQMX86_REG_BOARD_ID_E40C2:
 		return 24000;
-	case TQMX86_REG_BOARD_ID_E39M:
-	case TQMX86_REG_BOARD_ID_E39C:
-	case TQMX86_REG_BOARD_ID_E39x:
+	case TQMX86_REG_BOARD_ID_E39MS:
+	case TQMX86_REG_BOARD_ID_E39C1:
+	case TQMX86_REG_BOARD_ID_E39C2:
 		return 25000;
 	case TQMX86_REG_BOARD_ID_E38M:
 	case TQMX86_REG_BOARD_ID_E38C:
@@ -175,7 +176,7 @@ static int tqmx86_board_id_to_clk_rate(struct device *dev, u8 board_id)
 
 static int tqmx86_probe(struct platform_device *pdev)
 {
-	u8 board_id, rev, i2c_det, io_ext_int_val;
+	u8 board_id, sauc, rev, i2c_det, io_ext_int_val;
 	struct device *dev = &pdev->dev;
 	u8 gpio_irq_cfg, readback;
 	const char *board_name;
@@ -205,7 +206,8 @@ static int tqmx86_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	board_id = ioread8(io_base + TQMX86_REG_BOARD_ID);
-	board_name = tqmx86_board_id_to_name(board_id);
+	sauc = ioread8(io_base + TQMX86_REG_SAUC);
+	board_name = tqmx86_board_id_to_name(board_id, sauc);
 	rev = ioread8(io_base + TQMX86_REG_BOARD_REV);
 
 	dev_info(dev,
-- 
2.34.1