From:   Xingui Yang <yangxingui@huawei.com>
To:     <jejb@linux.ibm.com>, <martin.petersen@oracle.com>,
        <john.g.garry@oracle.com>
CC:     <linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linuxarm@huawei.com>, <yangxingui@huawei.com>,
        <prime.zeng@hisilicon.com>, <kangfenglong@huawei.com>
Subject: [PATCH RESEND] scsi: sd: Update dix config everytime sd_revalidate_disk is called
Date:   Tue, 21 Feb 2023 08:10:26 +0000
Message-ID: <20230221081026.24736-1-yangxingui@huawei.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

When the host protection capabilities are 0x77 and a DIF disk is connected,
the DIX and DIF of the disk are default enabled. Then if that DIF disk is
reformatted as a non-DIF format, per the currently flow, the DIX is kept
enabled which is not correct, which will cause the following errors when
accessing the non-DIF disk:
[root@localhost ~]# lsscsi -p
[7:0:5:0]    disk    xxx    /dev/sdc   DIF/Type3  T10-DIF-TYPE3-CRC
[root@localhost ~]# sg_format -F -s 512 /dev/sdc
[root@localhost ~]# lsscsi -p
[7:0:5:0]    disk    xxx    /dev/sdc   -          T10-DIF-TYPE3-CRC

[142829.032340] hisi_sas_v3_hw 0000:b4:04.0: erroneous completion iptt=2375 task=00000000bea0970c dev id=5 direct-attached phy4 addr=51c20dbaf642a000 CQ hdr: 0x1023 0x50947 0x0 0x20000 Error info: 0x0 0x0 0x4 0x0
[142829.073883] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[142829.079783] sas: sas_scsi_find_task: aborting task 0x00000000bea0970c
[142829.102342] sas: Internal abort: task to dev 51c20dbaf642a000 response: 0x0 status 0x5
[142829.110319] sas: sas_eh_handle_sas_errors: task 0x00000000bea0970c is done
[142829.117275] sd 7:0:5:0: [sdc] tag#2375 UNKNOWN(0x2003) Result: hostbyte=0x05 driverbyte=DRIVER_OK cmd_age=0s
[142829.127171] sd 7:0:5:0: [sdc] tag#2375 CDB: opcode=0x2a 2a 00 00 00 00 00 00 00 08 00
[142829.135059] I/O error, dev sdc, sector 0 op 0x1:(WRITE) flags 0x18800 phys_seg 1 prio class 2

On the contrary, when a non-DIF disk is connected and formatted as a DIF
disk, it is found that DIX is not enabled. Operation logs as follows:

[root@localhost ~]# lsscsi -p
[7:0:2:0]    disk    xxx    /dev/sdc   -          none
[root@localhost ~]# sg_format --format --fmtpinfo=3 --pfu=1 /dev/sdc
[root@localhost ~]# lsscsi -p
[7:0:2:0]    disk    xxx    /dev/sdc   DIF/Type3  none

This is because dix config is only updated when the first time a disk
is connected. In this patch, we fix the issue by with changes:
1. Remove check first_scan when call sd_config_protection().
2. Unregister block integrity profile after DIX becomes to 0.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
---
 drivers/scsi/sd.c     | 3 ---
 drivers/scsi/sd_dif.c | 4 +++-
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2aa3b0393b96..774414d129a4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2254,9 +2254,6 @@ static void sd_config_protection(struct scsi_disk *sdkp)
 {
 	struct scsi_device *sdp = sdkp->device;
 
-	if (!sdkp->first_scan)
-		return;
-
 	sd_dif_config_host(sdkp);
 
 	if (!sdkp->protection_type)
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 968993ee6d5d..78db8d85f97e 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -39,8 +39,10 @@ void sd_dif_config_host(struct scsi_disk *sdkp)
 		dif = 0; dix = 1;
 	}
 
-	if (!dix)
+	if (!dix) {
+		blk_integrity_unregister(disk);
 		return;
+	}
 
 	memset(&bi, 0, sizeof(bi));
 
-- 
2.17.1