From:   Sarannya S <quic_sarannya@quicinc.com>
To:     <quic_bjorande@quicinc.com>, <arnaud.pouliquen@foss.st.com>,
        <swboyd@chromium.org>, <quic_clew@quicinc.com>,
        <mathieu.poirier@linaro.org>
CC:     <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <linux-remoteproc@vger.kernel.org>,
        Sarannya S <quic_sarannya@quicinc.com>,
        Deepak Kumar Singh <quic_deesin@quicinc.com>,
        Bjorn Andersson <andersson@kernel.org>
Subject: [PATCH V5 1/3] rpmsg: core: Add signal API support
Date:   Tue, 21 Feb 2023 21:26:00 +0530
Message-ID: <1676994962-18206-2-git-send-email-quic_sarannya@quicinc.com>
In-Reply-To: <1676994962-18206-1-git-send-email-quic_sarannya@quicinc.com>
References: <1676994962-18206-1-git-send-email-quic_sarannya@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Some transports like Glink support the state notifications between
clients using flow control signals similar to serial protocol signals.
Local glink client drivers can send and receive flow control status
to glink clients running on remote processors.

Add APIs to support sending and receiving of flow control status by
rpmsg clients.

Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Sarannya S <quic_sarannya@quicinc.com>
---
 drivers/rpmsg/rpmsg_core.c     | 20 ++++++++++++++++++++
 drivers/rpmsg/rpmsg_internal.h |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index d6dde00e..e96967a 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -331,6 +331,24 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 EXPORT_SYMBOL(rpmsg_trysend_offchannel);
 
 /**
+ * rpmsg_set_flow_control() - sets/clears serial flow control signals
+ * @ept:	the rpmsg endpoint
+ * @enable:	pause/resume incoming data flow
+ *
+ * Return: 0 on success and an appropriate error value on failure.
+ */
+int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->set_flow_control)
+		return -ENXIO;
+
+	return ept->ops->set_flow_control(ept, enable);
+}
+EXPORT_SYMBOL(rpmsg_set_flow_control);
+
+/**
  * rpmsg_get_mtu() - get maximum transmission buffer size for sending message.
  * @ept: the rpmsg endpoint
  *
@@ -539,6 +557,8 @@ static int rpmsg_dev_probe(struct device *dev)
 
 		rpdev->ept = ept;
 		rpdev->src = ept->addr;
+
+		ept->flow_cb = rpdrv->flowcontrol;
 	}
 
 	err = rpdrv->probe(rpdev);
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index 39b646d..4fea45a 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -55,6 +55,7 @@ struct rpmsg_device_ops {
  * @trysendto:		see @rpmsg_trysendto(), optional
  * @trysend_offchannel:	see @rpmsg_trysend_offchannel(), optional
  * @poll:		see @rpmsg_poll(), optional
+ * @set_flow_control:	see @rpmsg_set_flow_control(), optional
  * @get_mtu:		see @rpmsg_get_mtu(), optional
  *
  * Indirection table for the operations that a rpmsg backend should implement.
@@ -75,6 +76,7 @@ struct rpmsg_endpoint_ops {
 			     void *data, int len);
 	__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
 			     poll_table *wait);
+	int (*set_flow_control)(struct rpmsg_endpoint *ept, bool enable);
 	ssize_t (*get_mtu)(struct rpmsg_endpoint *ept);
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project