From:   Alexey Romanov <avromanov@sberdevices.ru>
To:     <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <neil.armstrong@linaro.org>, <khilman@baylibre.com>,
        <jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
        <linus.walleij@linaro.org>
CC:     <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-amlogic@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <kernel@sberdevices.ru>,
        Alexey Romanov <avromanov@sberdevices.ru>
Subject: [PATCH v1 0/3] Meson A1 32-bit support
Date:   Wed, 22 Feb 2023 14:50:17 +0300
Message-ID: <20230222115020.55867-1-avromanov@sberdevices.ru>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Hello!

This patchset adds support for 32-bit Meson A1 board. 
We describe device tree with following components:
CPU, GIC, IRQ, Timer, UART, PIN controller. 
It's capable of booting up into the serial console.

We have tested this DTS and used drivers at our 
32-bit Meson A1 board and it works correctly.

Alexey Romanov (3):
  meson: pinctrl: use CONFIG_PINCTRL_A1 with CONFIG_ARM
  firmware: meson: use CONFIG_MESON_SM with CONFIG_ARM
  arch/arm: dts: introduce meson-a1 device tree

 arch/arm/boot/dts/meson-a1.dtsi | 151 ++++++++++++++++++++++++++++++++
 drivers/firmware/meson/Kconfig  |   2 +-
 drivers/pinctrl/meson/Kconfig   |   2 +-
 3 files changed, 153 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/meson-a1.dtsi

-- 
2.38.1