From:   Luca Ceresoli <luca.ceresoli@bootlin.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Luca Ceresoli <luca.ceresoli@bootlin.com>,
        Martyn Welch <martyn.welch@collabora.com>
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, Marek Vasut <marex@denx.de>,
        Abel Vesa <abel.vesa@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Lucas Stach <l.stach@pengutronix.de>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card
Date:   Wed, 22 Feb 2023 18:25:52 +0100
Message-Id: <20230222172552.1545519-1-luca.ceresoli@bootlin.com>
In-Reply-To: <20230222182252.2ad6d82b@booty>
References: <20230222182252.2ad6d82b@booty>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
NXPP SGTL5000 audio codec connected to I2S-0 (sai2).

This requires to:

 * add the power supplies (always on)
 * enable sai2 with pinmuxes
 * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
   IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
 .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 470ff8e31e32..894d9809f76d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -14,6 +14,57 @@ / {
 	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
 		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
 		     "fsl,imx8mp";
+
+	reg_vcc_3v3_audio: 3v3_audio_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_AUD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8_audio: 1v8_audio_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_AUD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sgtl5000-sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		audio-cpu = <&sai2>;
+		audio-codec = <&sgtl5000_codec>;
+	};
+};
+
+&i2c1 {
+	sgtl5000_codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+		clock-names = "mclk";
+
+		VDDA-supply  = <&reg_vcc_3v3_audio>;
+		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDIO-supply = <&reg_vcc_1v8_audio>;
+	};
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+
+	fsl,sai-mclk-direction-output;
+	status = "okay";
 };
 
 &flexcan1 {
@@ -49,4 +100,13 @@ pinctrl_smarc_gpio: smarcgpiosgrp {
 			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
 			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
 	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+		>;
+	};
 };
-- 
2.34.1