From:   Prashanth K <quic_prashk@quicinc.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Jakob Koschel <jakobkoschel@gmail.com>,
        =?UTF-8?q?J=C3=B3=20=C3=81gila=20Bitsch?= <jgilab@gmail.com>,
        Alan Stern <stern@rowland.harvard.edu>
CC:     Pratham Pratap <quic_ppratap@quicinc.com>,
        Jack Pham <quic_jackp@quicinc.com>,
        <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        Prashanth K <quic_prashk@quicinc.com>
Subject: [PATCH v3 1/2] usb: dwc3: gadget: Change condition for processing suspend event
Date:   Thu, 23 Feb 2023 18:12:00 +0530
Message-ID: <1677156121-30364-2-git-send-email-quic_prashk@quicinc.com>
In-Reply-To: <1677156121-30364-1-git-send-email-quic_prashk@quicinc.com>
References: <1677156121-30364-1-git-send-email-quic_prashk@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Currently we process the suspend interrupt event only if the
device is in configured state. Consider a case where device
is not configured and got suspend interrupt, in that case our
gadget will still use 100mA as composite_suspend didn't happen.
But battery charging specification (BC1.2) expects a downstream
device to draw less than 2.5mA when unconnected OR suspended.

Fix this by removing the condition for processing suspend event,
and thus composite_resume would set vbus draw to 2.

Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
---
 drivers/usb/dwc3/gadget.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 89dcfac..a83f34e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4241,15 +4241,8 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		break;
 	case DWC3_DEVICE_EVENT_SUSPEND:
 		/* It changed to be suspend event for version 2.30a and above */
-		if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) {
-			/*
-			 * Ignore suspend event until the gadget enters into
-			 * USB_STATE_CONFIGURED state.
-			 */
-			if (dwc->gadget->state >= USB_STATE_CONFIGURED)
-				dwc3_gadget_suspend_interrupt(dwc,
-						event->event_info);
-		}
+		if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+			dwc3_gadget_suspend_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
-- 
2.7.4