From:   Zev Weiss <zev@bewilderbeest.net>
To:     Andrew Jeffery <andrew@aj.id.au>, Joel Stanley <joel@jms.id.au>
Cc:     Zev Weiss <zev@bewilderbeest.net>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        openbmc@lists.ozlabs.org, stable@vger.kernel.org
Subject: [PATCH v2 1/3] ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED
Date:   Thu, 23 Feb 2023 16:03:58 -0800
Message-Id: <20230224000400.12226-2-zev@bewilderbeest.net>
In-Reply-To: <20230224000400.12226-1-zev@bewilderbeest.net>
References: <20230224000400.12226-1-zev@bewilderbeest.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Turns out it's in fact not the same as the heartbeat LED.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org # v5.18+
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
---
 arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
index ff4c07c69af1..00efe1a93a69 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -31,7 +31,7 @@ heartbeat {
 		};
 
 		system-fault {
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 	};
-- 
2.39.1.438.gdcb075ea9396.dirty