Received-SPF: Pass (protection.outlook.com: domain of nvidia.com designates
 216.228.117.161 as permitted sender) receiver=protection.outlook.com;
 client-ip=216.228.117.161; helo=mail.nvidia.com; pr=C
From:   Krishna Yarlagadda <kyarlagadda@nvidia.com>
To:     <robh+dt@kernel.org>, <broonie@kernel.org>, <peterhuewe@gmx.de>,
        <jgg@ziepe.ca>, <jarkko@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <linux-spi@vger.kernel.org>,
        <linux-tegra@vger.kernel.org>, <linux-integrity@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
CC:     <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
        <skomatineni@nvidia.com>, <ldewangan@nvidia.com>,
        Krishna Yarlagadda <kyarlagadda@nvidia.com>
Subject: [Patch V4 1/3] spi: Add TPM HW flow flag
Date:   Fri, 24 Feb 2023 21:19:39 +0530
Message-ID: <20230224154941.68587-2-kyarlagadda@nvidia.com>
In-Reply-To: <20230224154941.68587-1-kyarlagadda@nvidia.com>
References: <20230224154941.68587-1-kyarlagadda@nvidia.com>
MIME-Version: 1.0
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 24 Feb 2023 15:50:14.7575
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: e56d3671-0a6f-4d90-1730-08db167ed219
X-MS-Exchange-CrossTenant-Id: 43083d15-7273-40c1-b7db-39efd9ccc17a
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=43083d15-7273-40c1-b7db-39efd9ccc17a;Ip=[216.228.117.161];Helo=[mail.nvidia.com]
X-MS-Exchange-CrossTenant-AuthSource: BL02EPF000108EA.namprd05.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM6PR12MB4561
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

TPM spec defines flow control over SPI. Client device can insert a wait
state on MISO when address is trasmitted by controller on MOSI. It can
work only on full duplex.
Half duplex controllers need to implement flow control in HW.
Add a flag for TPM to indicate flow control is expected in controller.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
---
 include/linux/spi/spi.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 988aabc31871..b88494e31239 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -184,8 +184,9 @@ struct spi_device {
 	u8			chip_select;
 	u8			bits_per_word;
 	bool			rt;
-#define SPI_NO_TX	BIT(31)		/* No transmit wire */
-#define SPI_NO_RX	BIT(30)		/* No receive wire */
+#define SPI_NO_TX		BIT(31)		/* No transmit wire */
+#define SPI_NO_RX		BIT(30)		/* No receive wire */
+#define SPI_TPM_HW_FLOW		BIT(29)		/* TPM flow control */
 	/*
 	 * All bits defined above should be covered by SPI_MODE_KERNEL_MASK.
 	 * The SPI_MODE_KERNEL_MASK has the SPI_MODE_USER_MASK counterpart,
@@ -195,7 +196,7 @@ struct spi_device {
 	 * These bits must not overlap. A static assert check should make sure of that.
 	 * If adding extra bits, make sure to decrease the bit index below as well.
 	 */
-#define SPI_MODE_KERNEL_MASK	(~(BIT(30) - 1))
+#define SPI_MODE_KERNEL_MASK	(~(BIT(29) - 1))
 	u32			mode;
 	int			irq;
 	void			*controller_state;
-- 
2.17.1