Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6B81BC678D4 for ; Thu, 2 Mar 2023 17:15:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229789AbjCBRPP (ORCPT ); Thu, 2 Mar 2023 12:15:15 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51966 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229774AbjCBRPJ (ORCPT ); Thu, 2 Mar 2023 12:15:09 -0500 Received: from madras.collabora.co.uk (madras.collabora.co.uk [46.235.227.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 363D81ACD7; Thu, 2 Mar 2023 09:15:04 -0800 (PST) Received: from pan.home (unknown [IPv6:2a00:23c6:c311:3401:45a5:b946:dcd1:2820]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: martyn) by madras.collabora.co.uk (Postfix) with ESMTPSA id 312CA6602FA0; Thu, 2 Mar 2023 17:15:03 +0000 (GMT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; s=mail; t=1677777303; bh=OCpJIVKiIhDkoluSqCXAL788EeMUO17TOhq8p6k6zQ4=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=QpNtNc/OennHl8gvCrDULfdENVOiQDjIvyF8esrzVXIrZVMow/479xkYOEhwZI/bF 9iZPVdND2cW3LrTf0rhSr09++XfBMRua2a4EcExkKWvwxZUIdA6r612AKV8KXsHPNP 8ikGf8FJdeLC0xOxAuWnm+nN3fjMYNvi6zsG4gUR/63sKoi/XrYubOgMuGDmwasnQA 5AQA/PFthVeh5alf7OesbE5qJV8Ar+GHjTHQ7UGB9PZi2OqCYPGDlaRp0iMLK5nuER 8LrFXw7SJm5n4NDOB604gGDXT6W0Ru7yedkAbGRfMmqPLJkcm3pal8skF3ryD2uHDZ G8TKZ+Kamqsig== From: Martyn Welch To: Bjorn Andersson , Mathieu Poirier , Philipp Zabel Cc: kernel@collabora.com, Martyn Welch , linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org Subject: [PATCH v3 2/3] remoteproc: k4: Split out functions common with M4 driver Date: Thu, 2 Mar 2023 17:14:49 +0000 Message-Id: <20230302171450.1598576-3-martyn.welch@collabora.com> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230302171450.1598576-1-martyn.welch@collabora.com> References: <20230302171450.1598576-1-martyn.welch@collabora.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In the next commit we will be adding the M4F driver which shares a lot of commonality with the DSP driver. Split this shared functionality out so that it can be used by both drivers. Signed-off-by: Martyn Welch --- Changes since v2: - New patch (reordered refactoring from v2) drivers/remoteproc/Makefile | 2 +- drivers/remoteproc/ti_k3_common.c | 375 ++++++++++++++++++ drivers/remoteproc/ti_k3_common.h | 102 +++++ drivers/remoteproc/ti_k3_dsp_remoteproc.c | 462 ++-------------------- 4 files changed, 506 insertions(+), 435 deletions(-) create mode 100644 drivers/remoteproc/ti_k3_common.c create mode 100644 drivers/remoteproc/ti_k3_common.h diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 91314a9b43ce..55c552e27a45 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -36,6 +36,6 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o -obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o +obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o ti_k3_common.o obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o diff --git a/drivers/remoteproc/ti_k3_common.c b/drivers/remoteproc/ti_k3_common.c new file mode 100644 index 000000000000..e9bd6f0104e4 --- /dev/null +++ b/drivers/remoteproc/ti_k3_common.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI K3 Remote Processor(s) driver common code + * + * Refactored from ti_k3_dsp_remoteproc.c. + * + * ti_k3_dsp_remoteproc.c: + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Suman Anna + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap_remoteproc.h" +#include "remoteproc_internal.h" +#include "ti_sci_proc.h" +#include "ti_k3_common.h" + +/* + * Kick the remote processor to notify about pending unprocessed messages. + * The vqid usage is not used and is inconsequential, as the kick is performed + * through a simulated GPIO (a bit in an IPC interrupt-triggering register), + * the remote processor is expected to process both its Tx and Rx virtqueues. + */ +void k3_rproc_kick(struct rproc *rproc, int vqid) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = rproc->dev.parent; + mbox_msg_t msg = (mbox_msg_t)vqid; + int ret; + + /* send the index of the triggered virtqueue in the mailbox payload */ + ret = mbox_send_message(kproc->mbox, (void *)msg); + if (ret < 0) + dev_err(dev, "failed to send mailbox message, status = %d\n", + ret); +} +EXPORT_SYMBOL_GPL(k3_rproc_kick); + +/* Put the remote processor into reset */ +int k3_rproc_reset(struct k3_rproc *kproc) +{ + struct device *dev = kproc->dev; + int ret; + + ret = reset_control_assert(kproc->reset); + if (ret) { + dev_err(dev, "local-reset assert failed, ret = %d\n", ret); + return ret; + } + + if (kproc->data->uses_lreset) + return ret; + + ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) { + dev_err(dev, "module-reset assert failed, ret = %d\n", ret); + if (reset_control_deassert(kproc->reset)) + dev_warn(dev, "local-reset deassert back failed\n"); + } + + return ret; +} +EXPORT_SYMBOL_GPL(k3_rproc_reset); + +/* Release the remote processor from reset */ +int k3_rproc_release(struct k3_rproc *kproc) +{ + struct device *dev = kproc->dev; + int ret; + + if (kproc->data->uses_lreset) + goto lreset; + + ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) { + dev_err(dev, "module-reset deassert failed, ret = %d\n", ret); + return ret; + } + +lreset: + ret = reset_control_deassert(kproc->reset); + if (ret) { + dev_err(dev, "local-reset deassert failed, ret = %d\n", ret); + if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, + kproc->ti_sci_id)) + dev_warn(dev, "module-reset assert back failed\n"); + } + + return ret; +} +EXPORT_SYMBOL_GPL(k3_rproc_release); + +/* + * This function implements the .get_loaded_rsc_table() callback and is used + * to provide the resource table for a booted remote processor in IPC-only + * mode. The remote processor firmwares follow a design-by-contract approach + * and are expected to have the resource table at the base of the DDR region + * reserved for firmware usage. This provides flexibility for the remote + * processor to be booted by different bootloaders that may or may not have the + * ability to publish the resource table address and size through a DT + * property. + */ +struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc, + size_t *rsc_table_sz) +{ + struct k3_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + if (!kproc->rmem[0].cpu_addr) { + dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found"); + return ERR_PTR(-ENOMEM); + } + + /* + * NOTE: The resource table size is currently hard-coded to a maximum + * of 256 bytes. The most common resource table usage for K3 firmwares + * is to only have the vdev resource entry and an optional trace entry. + * The exact size could be computed based on resource table address, but + * the hard-coded value suffices to support the IPC-only mode. + */ + *rsc_table_sz = 256; + return (struct resource_table *)kproc->rmem[0].cpu_addr; +} +EXPORT_SYMBOL_GPL(k3_get_loaded_rsc_table); + +/* + * Custom function to translate a remote processor device address (internal + * RAMs only) to a kernel virtual address. The remote processors can access + * their RAMs at either an internal address visible only from a remote + * processor, or at the SoC-level bus address. Both these addresses need to be + * looked through for translation. The translated addresses can be used either + * by the remoteproc core for loading (when using kernel remoteproc loader), or + * by any rpmsg bus drivers. + */ +void *k3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) +{ + struct k3_rproc *kproc = rproc->priv; + void __iomem *va = NULL; + phys_addr_t bus_addr; + u32 dev_addr, offset; + size_t size; + int i; + + if (len == 0) + return NULL; + + for (i = 0; i < kproc->num_mems; i++) { + bus_addr = kproc->mem[i].bus_addr; + dev_addr = kproc->mem[i].dev_addr; + size = kproc->mem[i].size; + + if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) { + /* handle remote-view addresses */ + if (da >= dev_addr && + ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = kproc->mem[i].cpu_addr + offset; + return (__force void *)va; + } + } else { + /* handle SoC-view addresses */ + if (da >= bus_addr && + (da + len) <= (bus_addr + size)) { + offset = da - bus_addr; + va = kproc->mem[i].cpu_addr + offset; + return (__force void *)va; + } + } + } + + /* handle static DDR reserved memory regions */ + for (i = 0; i < kproc->num_rmems; i++) { + dev_addr = kproc->rmem[i].dev_addr; + size = kproc->rmem[i].size; + + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = kproc->rmem[i].cpu_addr + offset; + return (__force void *)va; + } + } + + return NULL; +} +EXPORT_SYMBOL_GPL(k3_rproc_da_to_va); + +int k3_rproc_of_get_memories(struct platform_device *pdev, + struct k3_rproc *kproc) +{ + const struct k3_rproc_dev_data *data = kproc->data; + struct device *dev = &pdev->dev; + struct resource *res; + int num_mems = 0; + int i; + + num_mems = kproc->data->num_mems; + kproc->mem = devm_kcalloc(kproc->dev, num_mems, + sizeof(*kproc->mem), GFP_KERNEL); + if (!kproc->mem) + return -ENOMEM; + + for (i = 0; i < num_mems; i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + data->mems[i].name); + if (!res) { + dev_err(dev, "found no memory resource for %s\n", + data->mems[i].name); + return -EINVAL; + } + if (!devm_request_mem_region(dev, res->start, + resource_size(res), + dev_name(dev))) { + dev_err(dev, "could not request %s region for resource\n", + data->mems[i].name); + return -EBUSY; + } + + kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start, + resource_size(res)); + if (!kproc->mem[i].cpu_addr) { + dev_err(dev, "failed to map %s memory\n", + data->mems[i].name); + return -ENOMEM; + } + kproc->mem[i].bus_addr = res->start; + kproc->mem[i].dev_addr = data->mems[i].dev_addr; + kproc->mem[i].size = resource_size(res); + + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n", + data->mems[i].name, &kproc->mem[i].bus_addr, + kproc->mem[i].size, kproc->mem[i].cpu_addr, + kproc->mem[i].dev_addr); + } + kproc->num_mems = num_mems; + + return 0; +} +EXPORT_SYMBOL_GPL(k3_rproc_of_get_memories); + +int k3_reserved_mem_init(struct k3_rproc *kproc) +{ + struct device *dev = kproc->dev; + struct device_node *np = dev->of_node; + struct device_node *rmem_np; + struct reserved_mem *rmem; + int num_rmems; + int ret, i; + + num_rmems = of_property_count_elems_of_size(np, "memory-region", + sizeof(phandle)); + if (num_rmems <= 0) { + dev_err(dev, "device does not reserved memory regions, ret = %d\n", + num_rmems); + return -EINVAL; + } + if (num_rmems < 2) { + dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n", + num_rmems); + return -EINVAL; + } + + /* use reserved memory region 0 for vring DMA allocations */ + ret = of_reserved_mem_device_init_by_idx(dev, np, 0); + if (ret) { + dev_err(dev, "device cannot initialize DMA pool, ret = %d\n", + ret); + return ret; + } + + num_rmems--; + kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL); + if (!kproc->rmem) { + ret = -ENOMEM; + goto release_rmem; + } + + /* use remaining reserved memory regions for static carveouts */ + for (i = 0; i < num_rmems; i++) { + rmem_np = of_parse_phandle(np, "memory-region", i + 1); + if (!rmem_np) { + ret = -EINVAL; + goto unmap_rmem; + } + + rmem = of_reserved_mem_lookup(rmem_np); + if (!rmem) { + of_node_put(rmem_np); + ret = -EINVAL; + goto unmap_rmem; + } + of_node_put(rmem_np); + + kproc->rmem[i].bus_addr = rmem->base; + /* 64-bit address regions currently not supported */ + kproc->rmem[i].dev_addr = (u32)rmem->base; + kproc->rmem[i].size = rmem->size; + kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size); + if (!kproc->rmem[i].cpu_addr) { + dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n", + i + 1, &rmem->base, &rmem->size); + ret = -ENOMEM; + goto unmap_rmem; + } + + dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", + i + 1, &kproc->rmem[i].bus_addr, + kproc->rmem[i].size, kproc->rmem[i].cpu_addr, + kproc->rmem[i].dev_addr); + } + kproc->num_rmems = num_rmems; + + return 0; + +unmap_rmem: + for (i--; i >= 0; i--) + iounmap(kproc->rmem[i].cpu_addr); + kfree(kproc->rmem); +release_rmem: + of_reserved_mem_device_release(kproc->dev); + return ret; +} +EXPORT_SYMBOL_GPL(k3_reserved_mem_init); + +void k3_reserved_mem_exit(struct k3_rproc *kproc) +{ + int i; + + for (i = 0; i < kproc->num_rmems; i++) + iounmap(kproc->rmem[i].cpu_addr); + kfree(kproc->rmem); + + of_reserved_mem_device_release(kproc->dev); +} +EXPORT_SYMBOL_GPL(k3_reserved_mem_exit); + +struct ti_sci_proc *k3_rproc_of_get_tsp(struct device *dev, + const struct ti_sci_handle *sci) +{ + struct ti_sci_proc *tsp; + u32 temp[2]; + int ret; + + ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids", + temp, 2); + if (ret < 0) + return ERR_PTR(ret); + + tsp = kzalloc(sizeof(*tsp), GFP_KERNEL); + if (!tsp) + return ERR_PTR(-ENOMEM); + + tsp->dev = dev; + tsp->sci = sci; + tsp->ops = &sci->ops.proc_ops; + tsp->proc_id = temp[0]; + tsp->host_id = temp[1]; + + return tsp; +} +EXPORT_SYMBOL_GPL(k3_rproc_of_get_tsp); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI K3 common Remoteproc support"); diff --git a/drivers/remoteproc/ti_k3_common.h b/drivers/remoteproc/ti_k3_common.h new file mode 100644 index 000000000000..312df2ab3cd2 --- /dev/null +++ b/drivers/remoteproc/ti_k3_common.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TI K3 Remote Processor(s) driver common code + * + * Refactored from ti_k3_dsp_remoteproc.c. + * + * ti_k3_dsp_remoteproc.c: + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Suman Anna + */ + +#ifndef REMOTEPROC_TI_K3_COMMON_H +#define REMOTEPROC_TI_K3_COMMON_H + +#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) + +/** + * struct k3_rproc_mem - internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @dev_addr: Device address of the memory region from DSP view + * @size: Size of the memory region + */ +struct k3_rproc_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + u32 dev_addr; + size_t size; +}; + +/** + * struct k3_rproc_mem_data - memory definitions for a DSP + * @name: name for this memory entry + * @dev_addr: device address for the memory entry + */ +struct k3_rproc_mem_data { + const char *name; + const u32 dev_addr; +}; + +/** + * struct k3_rproc_dev_data - device data structure for a DSP + * @mems: pointer to memory definitions for a DSP + * @num_mems: number of memory regions in @mems + * @boot_align_addr: boot vector address alignment granularity + * @uses_lreset: flag to denote the need for local reset management + */ +struct k3_rproc_dev_data { + const struct k3_rproc_mem_data *mems; + u32 num_mems; + u32 boot_align_addr; + bool uses_lreset; +}; + +/** + * struct k3_rproc - k3 remote processor driver structure + * @dev: cached device pointer + * @rproc: remoteproc device handle + * @mem: internal memory regions data + * @num_mems: number of internal memory regions + * @rmem: reserved memory regions data + * @num_rmems: number of reserved memory regions + * @reset: reset control handle + * @data: pointer to device data + * @tsp: TI-SCI processor control handle + * @ti_sci: TI-SCI handle + * @ti_sci_id: TI-SCI device identifier + * @mbox: mailbox channel handle + * @client: mailbox client to request the mailbox channel + * @ipc_only: flag to indicate IPC-only mode + */ +struct k3_rproc { + struct device *dev; + struct rproc *rproc; + struct k3_rproc_mem *mem; + int num_mems; + struct k3_rproc_mem *rmem; + int num_rmems; + struct reset_control *reset; + const struct k3_rproc_dev_data *data; + struct ti_sci_proc *tsp; + const struct ti_sci_handle *ti_sci; + u32 ti_sci_id; + struct mbox_chan *mbox; + struct mbox_client client; +}; + +void k3_rproc_kick(struct rproc *rproc, int vqid); +int k3_rproc_reset(struct k3_rproc *kproc); +int k3_rproc_release(struct k3_rproc *kproc); +struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc, + size_t *rsc_table_sz); +void *k3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, + bool *is_iomem); +int k3_rproc_of_get_memories(struct platform_device *pdev, + struct k3_rproc *kproc); +int k3_reserved_mem_init(struct k3_rproc *kproc); +void k3_reserved_mem_exit(struct k3_rproc *kproc); +struct ti_sci_proc *k3_rproc_of_get_tsp(struct device *dev, + const struct ti_sci_handle *sci); + +#endif /* REMOTEPROC_TI_K3_COMMON_H */ diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c index eb9c64f7b9b4..006fd444badb 100644 --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c @@ -20,78 +20,7 @@ #include "omap_remoteproc.h" #include "remoteproc_internal.h" #include "ti_sci_proc.h" - -#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) - -/** - * struct k3_dsp_mem - internal memory structure - * @cpu_addr: MPU virtual address of the memory region - * @bus_addr: Bus address used to access the memory region - * @dev_addr: Device address of the memory region from DSP view - * @size: Size of the memory region - */ -struct k3_dsp_mem { - void __iomem *cpu_addr; - phys_addr_t bus_addr; - u32 dev_addr; - size_t size; -}; - -/** - * struct k3_dsp_mem_data - memory definitions for a DSP - * @name: name for this memory entry - * @dev_addr: device address for the memory entry - */ -struct k3_dsp_mem_data { - const char *name; - const u32 dev_addr; -}; - -/** - * struct k3_dsp_dev_data - device data structure for a DSP - * @mems: pointer to memory definitions for a DSP - * @num_mems: number of memory regions in @mems - * @boot_align_addr: boot vector address alignment granularity - * @uses_lreset: flag to denote the need for local reset management - */ -struct k3_dsp_dev_data { - const struct k3_dsp_mem_data *mems; - u32 num_mems; - u32 boot_align_addr; - bool uses_lreset; -}; - -/** - * struct k3_dsp_rproc - k3 DSP remote processor driver structure - * @dev: cached device pointer - * @rproc: remoteproc device handle - * @mem: internal memory regions data - * @num_mems: number of internal memory regions - * @rmem: reserved memory regions data - * @num_rmems: number of reserved memory regions - * @reset: reset control handle - * @data: pointer to DSP-specific device data - * @tsp: TI-SCI processor control handle - * @ti_sci: TI-SCI handle - * @ti_sci_id: TI-SCI device identifier - * @mbox: mailbox channel handle - * @client: mailbox client to request the mailbox channel - */ -struct k3_dsp_rproc { - struct device *dev; - struct rproc *rproc; - struct k3_dsp_mem *mem; - int num_mems; - struct k3_dsp_mem *rmem; - int num_rmems; - struct reset_control *reset; - const struct k3_dsp_dev_data *data; - struct ti_sci_proc *tsp; - const struct ti_sci_handle *ti_sci; - u32 ti_sci_id; - struct mbox_chan *mbox; - struct mbox_client client; -}; +#include "ti_k3_common.h" /** * k3_dsp_rproc_mbox_callback() - inbound mailbox message handler @@ -109,7 +38,7 @@ struct k3_dsp_rproc { */ static void k3_dsp_rproc_mbox_callback(struct mbox_client *client, void *data) { - struct k3_dsp_rproc *kproc = container_of(client, struct k3_dsp_rproc, + struct k3_rproc *kproc = container_of(client, struct k3_rproc, client); struct device *dev = kproc->rproc->dev.parent; const char *name = kproc->rproc->name; @@ -142,83 +71,9 @@ static void k3_dsp_rproc_mbox_callback(struct mbox_client *client, void *data) } } -/* - * Kick the remote processor to notify about pending unprocessed messages. - * The vqid usage is not used and is inconsequential, as the kick is performed - * through a simulated GPIO (a bit in an IPC interrupt-triggering register), - * the remote processor is expected to process both its Tx and Rx virtqueues. - */ -static void k3_dsp_rproc_kick(struct rproc *rproc, int vqid) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = rproc->dev.parent; - mbox_msg_t msg = (mbox_msg_t)vqid; - int ret; - - /* send the index of the triggered virtqueue in the mailbox payload */ - ret = mbox_send_message(kproc->mbox, (void *)msg); - if (ret < 0) - dev_err(dev, "failed to send mailbox message, status = %d\n", - ret); -} - -/* Put the DSP processor into reset */ -static int k3_dsp_rproc_reset(struct k3_dsp_rproc *kproc) -{ - struct device *dev = kproc->dev; - int ret; - - ret = reset_control_assert(kproc->reset); - if (ret) { - dev_err(dev, "local-reset assert failed, ret = %d\n", ret); - return ret; - } - - if (kproc->data->uses_lreset) - return ret; - - ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, - kproc->ti_sci_id); - if (ret) { - dev_err(dev, "module-reset assert failed, ret = %d\n", ret); - if (reset_control_deassert(kproc->reset)) - dev_warn(dev, "local-reset deassert back failed\n"); - } - - return ret; -} - -/* Release the DSP processor from reset */ -static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) -{ - struct device *dev = kproc->dev; - int ret; - - if (kproc->data->uses_lreset) - goto lreset; - - ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, - kproc->ti_sci_id); - if (ret) { - dev_err(dev, "module-reset deassert failed, ret = %d\n", ret); - return ret; - } - -lreset: - ret = reset_control_deassert(kproc->reset); - if (ret) { - dev_err(dev, "local-reset deassert failed, ret = %d\n", ret); - if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, - kproc->ti_sci_id)) - dev_warn(dev, "module-reset assert back failed\n"); - } - - return ret; -} - static int k3_dsp_rproc_request_mbox(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; struct mbox_client *client = &kproc->client; struct device *dev = kproc->dev; int ret; @@ -253,6 +108,7 @@ static int k3_dsp_rproc_request_mbox(struct rproc *rproc) return 0; } + /* * The C66x DSP cores have a local reset that affects only the CPU, and a * generic module reset that powers on the device and allows the DSP internal @@ -265,7 +121,7 @@ static int k3_dsp_rproc_request_mbox(struct rproc *rproc) */ static int k3_dsp_rproc_prepare(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; struct device *dev = kproc->dev; int ret; @@ -289,7 +145,7 @@ static int k3_dsp_rproc_prepare(struct rproc *rproc) */ static int k3_dsp_rproc_unprepare(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; struct device *dev = kproc->dev; int ret; @@ -310,7 +166,7 @@ static int k3_dsp_rproc_unprepare(struct rproc *rproc) */ static int k3_dsp_rproc_start(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; struct device *dev = kproc->dev; u32 boot_addr; int ret; @@ -332,7 +188,7 @@ static int k3_dsp_rproc_start(struct rproc *rproc) if (ret) goto put_mbox; - ret = k3_dsp_rproc_release(kproc); + ret = k3_rproc_release(kproc); if (ret) goto put_mbox; @@ -351,11 +207,11 @@ static int k3_dsp_rproc_start(struct rproc *rproc) */ static int k3_dsp_rproc_stop(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; mbox_free_channel(kproc->mbox); - k3_dsp_rproc_reset(kproc); + k3_rproc_reset(kproc); return 0; } @@ -370,7 +226,7 @@ static int k3_dsp_rproc_stop(struct rproc *rproc) */ static int k3_dsp_rproc_attach(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; struct device *dev = kproc->dev; int ret; @@ -392,7 +248,7 @@ static int k3_dsp_rproc_attach(struct rproc *rproc) */ static int k3_dsp_rproc_detach(struct rproc *rproc) { - struct k3_dsp_rproc *kproc = rproc->priv; + struct k3_rproc *kproc = rproc->priv; struct device *dev = kproc->dev; mbox_free_channel(kproc->mbox); @@ -400,282 +256,20 @@ static int k3_dsp_rproc_detach(struct rproc *rproc) return 0; } -/* - * This function implements the .get_loaded_rsc_table() callback and is used - * to provide the resource table for a booted DSP in IPC-only mode. The K3 DSP - * firmwares follow a design-by-contract approach and are expected to have the - * resource table at the base of the DDR region reserved for firmware usage. - * This provides flexibility for the remote processor to be booted by different - * bootloaders that may or may not have the ability to publish the resource table - * address and size through a DT property. This callback is invoked only in - * IPC-only mode. - */ -static struct resource_table *k3_dsp_get_loaded_rsc_table(struct rproc *rproc, - size_t *rsc_table_sz) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - - if (!kproc->rmem[0].cpu_addr) { - dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found"); - return ERR_PTR(-ENOMEM); - } - - /* - * NOTE: The resource table size is currently hard-coded to a maximum - * of 256 bytes. The most common resource table usage for K3 firmwares - * is to only have the vdev resource entry and an optional trace entry. - * The exact size could be computed based on resource table address, but - * the hard-coded value suffices to support the IPC-only mode. - */ - *rsc_table_sz = 256; - return (struct resource_table *)kproc->rmem[0].cpu_addr; -} - -/* - * Custom function to translate a DSP device address (internal RAMs only) to a - * kernel virtual address. The DSPs can access their RAMs at either an internal - * address visible only from a DSP, or at the SoC-level bus address. Both these - * addresses need to be looked through for translation. The translated addresses - * can be used either by the remoteproc core for loading (when using kernel - * remoteproc loader), or by any rpmsg bus drivers. - */ -static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) -{ - struct k3_dsp_rproc *kproc = rproc->priv; - void __iomem *va = NULL; - phys_addr_t bus_addr; - u32 dev_addr, offset; - size_t size; - int i; - - if (len == 0) - return NULL; - - for (i = 0; i < kproc->num_mems; i++) { - bus_addr = kproc->mem[i].bus_addr; - dev_addr = kproc->mem[i].dev_addr; - size = kproc->mem[i].size; - - if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) { - /* handle DSP-view addresses */ - if (da >= dev_addr && - ((da + len) <= (dev_addr + size))) { - offset = da - dev_addr; - va = kproc->mem[i].cpu_addr + offset; - return (__force void *)va; - } - } else { - /* handle SoC-view addresses */ - if (da >= bus_addr && - (da + len) <= (bus_addr + size)) { - offset = da - bus_addr; - va = kproc->mem[i].cpu_addr + offset; - return (__force void *)va; - } - } - } - - /* handle static DDR reserved memory regions */ - for (i = 0; i < kproc->num_rmems; i++) { - dev_addr = kproc->rmem[i].dev_addr; - size = kproc->rmem[i].size; - - if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { - offset = da - dev_addr; - va = kproc->rmem[i].cpu_addr + offset; - return (__force void *)va; - } - } - - return NULL; -} static const struct rproc_ops k3_dsp_rproc_ops = { .start = k3_dsp_rproc_start, .stop = k3_dsp_rproc_stop, - .kick = k3_dsp_rproc_kick, - .da_to_va = k3_dsp_rproc_da_to_va, + .kick = k3_rproc_kick, + .da_to_va = k3_rproc_da_to_va, }; -static int k3_dsp_rproc_of_get_memories(struct platform_device *pdev, - struct k3_dsp_rproc *kproc) -{ - const struct k3_dsp_dev_data *data = kproc->data; - struct device *dev = &pdev->dev; - struct resource *res; - int num_mems = 0; - int i; - - num_mems = kproc->data->num_mems; - kproc->mem = devm_kcalloc(kproc->dev, num_mems, - sizeof(*kproc->mem), GFP_KERNEL); - if (!kproc->mem) - return -ENOMEM; - - for (i = 0; i < num_mems; i++) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - data->mems[i].name); - if (!res) { - dev_err(dev, "found no memory resource for %s\n", - data->mems[i].name); - return -EINVAL; - } - if (!devm_request_mem_region(dev, res->start, - resource_size(res), - dev_name(dev))) { - dev_err(dev, "could not request %s region for resource\n", - data->mems[i].name); - return -EBUSY; - } - - kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start, - resource_size(res)); - if (!kproc->mem[i].cpu_addr) { - dev_err(dev, "failed to map %s memory\n", - data->mems[i].name); - return -ENOMEM; - } - kproc->mem[i].bus_addr = res->start; - kproc->mem[i].dev_addr = data->mems[i].dev_addr; - kproc->mem[i].size = resource_size(res); - - dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n", - data->mems[i].name, &kproc->mem[i].bus_addr, - kproc->mem[i].size, kproc->mem[i].cpu_addr, - kproc->mem[i].dev_addr); - } - kproc->num_mems = num_mems; - - return 0; -} - -static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc) -{ - struct device *dev = kproc->dev; - struct device_node *np = dev->of_node; - struct device_node *rmem_np; - struct reserved_mem *rmem; - int num_rmems; - int ret, i; - - num_rmems = of_property_count_elems_of_size(np, "memory-region", - sizeof(phandle)); - if (num_rmems <= 0) { - dev_err(dev, "device does not reserved memory regions, ret = %d\n", - num_rmems); - return -EINVAL; - } - if (num_rmems < 2) { - dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n", - num_rmems); - return -EINVAL; - } - - /* use reserved memory region 0 for vring DMA allocations */ - ret = of_reserved_mem_device_init_by_idx(dev, np, 0); - if (ret) { - dev_err(dev, "device cannot initialize DMA pool, ret = %d\n", - ret); - return ret; - } - - num_rmems--; - kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL); - if (!kproc->rmem) { - ret = -ENOMEM; - goto release_rmem; - } - - /* use remaining reserved memory regions for static carveouts */ - for (i = 0; i < num_rmems; i++) { - rmem_np = of_parse_phandle(np, "memory-region", i + 1); - if (!rmem_np) { - ret = -EINVAL; - goto unmap_rmem; - } - - rmem = of_reserved_mem_lookup(rmem_np); - if (!rmem) { - of_node_put(rmem_np); - ret = -EINVAL; - goto unmap_rmem; - } - of_node_put(rmem_np); - - kproc->rmem[i].bus_addr = rmem->base; - /* 64-bit address regions currently not supported */ - kproc->rmem[i].dev_addr = (u32)rmem->base; - kproc->rmem[i].size = rmem->size; - kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size); - if (!kproc->rmem[i].cpu_addr) { - dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n", - i + 1, &rmem->base, &rmem->size); - ret = -ENOMEM; - goto unmap_rmem; - } - - dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", - i + 1, &kproc->rmem[i].bus_addr, - kproc->rmem[i].size, kproc->rmem[i].cpu_addr, - kproc->rmem[i].dev_addr); - } - kproc->num_rmems = num_rmems; - - return 0; - -unmap_rmem: - for (i--; i >= 0; i--) - iounmap(kproc->rmem[i].cpu_addr); - kfree(kproc->rmem); -release_rmem: - of_reserved_mem_device_release(kproc->dev); - return ret; -} - -static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc) -{ - int i; - - for (i = 0; i < kproc->num_rmems; i++) - iounmap(kproc->rmem[i].cpu_addr); - kfree(kproc->rmem); - - of_reserved_mem_device_release(kproc->dev); -} - -static -struct ti_sci_proc *k3_dsp_rproc_of_get_tsp(struct device *dev, - const struct ti_sci_handle *sci) -{ - struct ti_sci_proc *tsp; - u32 temp[2]; - int ret; - - ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids", - temp, 2); - if (ret < 0) - return ERR_PTR(ret); - - tsp = kzalloc(sizeof(*tsp), GFP_KERNEL); - if (!tsp) - return ERR_PTR(-ENOMEM); - - tsp->dev = dev; - tsp->sci = sci; - tsp->ops = &sci->ops.proc_ops; - tsp->proc_id = temp[0]; - tsp->host_id = temp[1]; - - return tsp; -} - static int k3_dsp_rproc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; - const struct k3_dsp_dev_data *data; - struct k3_dsp_rproc *kproc; + const struct k3_rproc_dev_data *data; + struct k3_rproc *kproc; struct rproc *rproc; const char *fw_name; bool p_state = false; @@ -733,7 +327,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) goto put_sci; } - kproc->tsp = k3_dsp_rproc_of_get_tsp(dev, kproc->ti_sci); + kproc->tsp = k3_rproc_of_get_tsp(dev, kproc->ti_sci); if (IS_ERR(kproc->tsp)) { dev_err(dev, "failed to construct ti-sci proc control, ret = %d\n", ret); @@ -747,11 +341,11 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) goto free_tsp; } - ret = k3_dsp_rproc_of_get_memories(pdev, kproc); + ret = k3_rproc_of_get_memories(pdev, kproc); if (ret) goto release_tsp; - ret = k3_dsp_reserved_mem_init(kproc); + ret = k3_reserved_mem_init(kproc); if (ret) { dev_err(dev, "reserved memory init failed, ret = %d\n", ret); goto release_tsp; @@ -776,7 +370,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) rproc->ops->stop = NULL; rproc->ops->attach = k3_dsp_rproc_attach; rproc->ops->detach = k3_dsp_rproc_detach; - rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table; + rproc->ops->get_loaded_rsc_table = k3_get_loaded_rsc_table; } else { dev_info(dev, "configured DSP for remoteproc mode\n"); /* @@ -792,7 +386,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) goto release_mem; } else if (ret == 0) { dev_warn(dev, "local reset is deasserted for device\n"); - k3_dsp_rproc_reset(kproc); + k3_rproc_reset(kproc); } } } @@ -809,7 +403,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) return 0; release_mem: - k3_dsp_reserved_mem_exit(kproc); + k3_reserved_mem_exit(kproc); release_tsp: ret1 = ti_sci_proc_release(kproc->tsp); if (ret1) @@ -827,7 +421,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) static int k3_dsp_rproc_remove(struct platform_device *pdev) { - struct k3_dsp_rproc *kproc = platform_get_drvdata(pdev); + struct k3_rproc *kproc = platform_get_drvdata(pdev); struct rproc *rproc = kproc->rproc; struct device *dev = &pdev->dev; int ret; @@ -852,32 +446,32 @@ static int k3_dsp_rproc_remove(struct platform_device *pdev) if (ret) dev_err(dev, "failed to put ti_sci handle, ret = %d\n", ret); - k3_dsp_reserved_mem_exit(kproc); + k3_reserved_mem_exit(kproc); rproc_free(kproc->rproc); return 0; } -static const struct k3_dsp_mem_data c66_mems[] = { +static const struct k3_rproc_mem_data c66_mems[] = { { .name = "l2sram", .dev_addr = 0x800000 }, { .name = "l1pram", .dev_addr = 0xe00000 }, { .name = "l1dram", .dev_addr = 0xf00000 }, }; /* C71x cores only have a L1P Cache, there are no L1P SRAMs */ -static const struct k3_dsp_mem_data c71_mems[] = { +static const struct k3_rproc_mem_data c71_mems[] = { { .name = "l2sram", .dev_addr = 0x800000 }, { .name = "l1dram", .dev_addr = 0xe00000 }, }; -static const struct k3_dsp_dev_data c66_data = { +static const struct k3_rproc_dev_data c66_data = { .mems = c66_mems, .num_mems = ARRAY_SIZE(c66_mems), .boot_align_addr = SZ_1K, .uses_lreset = true, }; -static const struct k3_dsp_dev_data c71_data = { +static const struct k3_rproc_dev_data c71_data = { .mems = c71_mems, .num_mems = ARRAY_SIZE(c71_mems), .boot_align_addr = SZ_2M, -- 2.39.1