Message-ID: <19c95fa7-d436-5171-e3bb-d466ace1fe74@linaro.org>
Date:   Sat, 4 Mar 2023 13:57:06 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
Subject: Re: [PATCH 3/8] arm64: dts: qcom: msm8998-sony-xperia: correct GPIO
 keys wakeup
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20230304123358.34274-1-krzysztof.kozlowski@linaro.org>
 <20230304123358.34274-3-krzysztof.kozlowski@linaro.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230304123358.34274-3-krzysztof.kozlowski@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 4.03.2023 13:33, Krzysztof Kozlowski wrote:
> gpio-keys,wakeup is a deprecated property:
> 
>   msm8998-sony-xperia-yoshino-lilac.dtb: gpio-keys: button-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index 820414758888..fa02e45f1c24 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -106,7 +106,7 @@ button-vol-down {
>  			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
>  			linux,input-type = <EV_KEY>;
>  			linux,code = <KEY_VOLUMEDOWN>;
> -			gpio-key,wakeup;
> +			wakeup-source;
>  			debounce-interval = <15>;
>  		};
>  
> @@ -138,7 +138,7 @@ event-hall-sensor0 {
>  			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
>  			linux,input-type = <EV_SW>;
>  			linux,code = <SW_LID>;
> -			gpio-key,wakeup;
> +			wakeup-source;
>  			debounce-interval = <30>;
>  		};
>  	};