Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
MIME-Version: 1.0
From:   Rob Herring <robh@kernel.org>
To:     Minda Chen <minda.chen@starfivetech.com>
Cc:     linux-phy@lists.infradead.org,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-kernel@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
        Emil Renner Berthing <kernel@esmil.dk>
In-Reply-To: <20230306095257.25957-1-minda.chen@starfivetech.com>
References: <20230306095257.25957-1-minda.chen@starfivetech.com>
Message-Id: <167810459782.12203.9014682894570874393.robh@kernel.org>
Subject: Re: [PATCH 1/3] dt-bindings: phy: Add StarFive JH7110 USB
 dt-binding
Date:   Mon, 06 Mar 2023 06:25:17 -0600
Precedence: bulk


On Mon, 06 Mar 2023 17:52:57 +0800, Minda Chen wrote:
> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
> USB controller is cadence USB 3.0 IP.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
>  .../bindings/phy/starfive,jh7110-usb-phy.yaml | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:30:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:40:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts'
Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):


See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230306095257.25957-1-minda.chen@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.