From:   William Breathitt Gray <william.gray@linaro.org>
To:     linus.walleij@linaro.org, brgl@bgdev.pl
Cc:     linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
        broonie@kernel.org, andriy.shevchenko@linux.intel.com,
        William Breathitt Gray <william.gray@linaro.org>,
        techsupport@winsystems.com, pdemetrotion@winsystems.com,
        quarium@gmail.com, jhentges@accesio.com, jay.dolan@accesio.com
Subject: [PATCH v4 0/3] Migrate the PCIe-IDIO-24 and WS16C48 GPIO drivers to the regmap API
Date:   Mon,  6 Mar 2023 07:59:50 -0500
Message-Id: <cover.1678106722.git.william.gray@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Changes in v4:
 - Allocate idio24gpio before using it in idio_24_probe()
Changes in v3:
 - Drop map from set_type_config() parameter list; regmap can be passed
   by irq_drv_data instead
 - Adjust idio_24_set_type_config() for parameter list
 - Add mutex to prevent clobbering the COS_ENABLE register when masking
   IRQ and setting their type configuration
Changes in v2:
 - Simplify PCIe-IDIO-24 register offset defines to remove superfluous
   arithmetic
 - Check for NULL pointer after chip->irq_drv_data allocation
 - Set gpio_regmap drvdata and use gpio_regmap_get_drvdata() to get the
   regmap in idio_24_reg_map_xlate()

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip
set_type_config() is included. This is needed by the
idio_24_set_type_config() and ws16c48_set_type_config() callbacks in
order to update the type configuration on their respective devices.

A patch to migrate the WS16C48 GPIO driver to the regmap API is included
in this series due to its dependence on the struct regmap_irq_chip
set_type_config() change.

William Breathitt Gray (3):
  regmap: Pass irq_drv_data as a parameter for set_type_config()
  gpio: pcie-idio-24: Migrate to the regmap API
  gpio: ws16c48: Migrate to the regmap API

 drivers/base/regmap/regmap-irq.c |   8 +-
 drivers/gpio/Kconfig             |   6 +
 drivers/gpio/gpio-pcie-idio-24.c | 710 ++++++++++++-------------------
 drivers/gpio/gpio-ws16c48.c      | 566 +++++++++---------------
 include/linux/regmap.h           |   6 +-
 5 files changed, 497 insertions(+), 799 deletions(-)


base-commit: 0d8b4049bb4792da225e2c908282bb9ed1024ac7
-- 
2.39.2