From:   Konrad Dybcio <konrad.dybcio@linaro.org>
To:     linux-arm-msm@vger.kernel.org, andersson@kernel.org,
        agross@kernel.org
Cc:     marijn.suijten@somainline.org,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>, linux-clk@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] clk: qcom: gcc-msm8998: Update the .pwrsts for usb gdsc
Date:   Tue,  7 Mar 2023 13:31:59 +0100
Message-Id: <20230307123159.3797551-3-konrad.dybcio@linaro.org>
In-Reply-To: <20230307123159.3797551-1-konrad.dybcio@linaro.org>
References: <20230307123159.3797551-1-konrad.dybcio@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The USB controller on msm8998 doesn't retain its state when the system
goes into low power state and the GDSCs are turned off.

This can be observed by the USB connection not coming back alive after
putting the device into suspend, essentially breaking USB.

Work around this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.

This change should be reverted when a proper suspend sequence is
implemented in the USB drivers.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
New patch

 drivers/clk/qcom/gcc-msm8998.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index f1aacbfe6bb4..8790bbdcd2e2 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2901,7 +2901,8 @@ static struct gdsc usb_30_gdsc = {
 	.pd = {
 		.name = "usb_30_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	/* TODO: Change to OFF_ON when USB drivers get proper suspend support */
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };
 
-- 
2.39.2