From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Melody Olvera <quic_molvera@quicinc.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Souradeep Chowdhury <quic_schowdhu@quicinc.com>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 03/11] arm64: dts: qcom: qdu1000: drop incorrect serial properties
Date:   Wed,  8 Mar 2023 13:58:58 +0100
Message-Id: <20230308125906.236885-3-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230308125906.236885-1-krzysztof.kozlowski@linaro.org>
References: <20230308125906.236885-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The serial node does not use/allow address/size cells:

  qdu1000-idp.dtb: geniqup@9c0000: serial@99c000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)

Fixes: 6bd20c54b589 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

---

Changes since v1:
1. None
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index f234159d2060..c72a51c32a30 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -412,8 +412,6 @@ uart0: serial@980000 {
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -581,8 +579,6 @@ uart7: serial@99c000 {
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				pinctrl-names = "default";
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
-- 
2.34.1