From:   Philippe Schenker <dev@pschenker.ch>
To:     devicetree@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>
Cc:     NXP Linux Team <linux-imx@nxp.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Frank Rowand <frowand.list@gmail.com>,
        linux-arm-kernel@lists.infradead.org,
        Fabio Estevam <festevam@gmail.com>,
        Philippe Schenker <philippe.schenker@toradex.com>,
        linux-kernel@vger.kernel.org
Subject: [PATCH v1 17/25] arm64: dts: colibri-imx8x: eval: Add spi-to-can
Date:   Wed,  8 Mar 2023 13:52:51 +0100
Message-Id: <20230308125300.58244-18-dev@pschenker.ch>
In-Reply-To: <20230308125300.58244-1-dev@pschenker.ch>
References: <20230308125300.58244-1-dev@pschenker.ch>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Philippe Schenker <philippe.schenker@toradex.com>

Add mcp2515 spi-to-can to &lpspi2.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 .../dts/freescale/imx8x-colibri-eval-v3.dtsi  | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index 625d2caaf5d1..e7e3cf462408 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -11,6 +11,13 @@ aliases {
 		rtc1 = &rtc;
 	};
 
+	/* fixed crystal dedicated to mcp25xx */
+	clk16m: clock-16mhz-fixed {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -44,6 +51,18 @@ rtc_i2c: rtc@68 {
 /* Colibri SPI */
 &lpspi2 {
 	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_can_int>;
+		pinctrl-names = "default";
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
 };
 
 /* Colibri UART_B */
-- 
2.39.2