From:   Hermes Zhang <chenhuiz@axis.com>
To:     Sebastian Reichel <sre@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Andrew Davis <afd@ti.com>
CC:     <kernel@axis.com>, Hermes Zhang <chenhuiz@axis.com>,
        <linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH] dt-bindings: power: supply: bq256xx: Add ts-ignore property
Date:   Thu, 9 Mar 2023 10:39:26 +0800
Message-ID: <20230309023926.38682-1-chenhuiz@axis.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add a new property: ts-ignore to allow user to enable the TS_IGNORE flag
in chip. Ignore TS pin will allow user to control the charging
parameters instead of the default JEITA profile in chip.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---
 Documentation/devicetree/bindings/power/supply/bq256xx.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
index 82f382a7ffb3..74fd48f4bec5 100644
--- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -68,6 +68,12 @@ properties:
       Interrupt sends an active low, 256 μs pulse to host to report the charger
       device status and faults.
 
+  ts-ignore:
+    type: boolean
+    description: |
+      If this property is set, the TS_IGNORE flag will be set to 1 which means
+      will not apply JEITA profile during the charging.
+
 required:
   - compatible
   - reg
-- 
2.30.2