From:   =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
To:     linux-serial@vger.kernel.org,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Marcel Holtmann <marcel@holtmann.org>,
        Johan Hedberg <johan.hedberg@gmail.com>,
        Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
        linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 3/8] Bluetooth: hci_ldisc: Fix tty_set_termios() return value assumptions
Date:   Thu,  9 Mar 2023 10:20:30 +0200
Message-Id: <20230309082035.14880-4-ilpo.jarvinen@linux.intel.com>
In-Reply-To: <20230309082035.14880-1-ilpo.jarvinen@linux.intel.com>
References: <20230309082035.14880-1-ilpo.jarvinen@linux.intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

tty_set_termios() never returns anything else than 0. Make the debug
prints to look directly into the new termios instead to check CRTSCTS
state.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/bluetooth/hci_ldisc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 865112e96ff9..efdda2c3fce8 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -323,9 +323,9 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
 		/* Disable hardware flow control */
 		ktermios = tty->termios;
 		ktermios.c_cflag &= ~CRTSCTS;
-		status = tty_set_termios(tty, &ktermios);
+		tty_set_termios(tty, &ktermios);
 		BT_DBG("Disabling hardware flow control: %s",
-		       status ? "failed" : "success");
+		       (tty->termios.c_cflag & CRTSCTS) ? "failed" : "success");
 
 		/* Clear RTS to prevent the device from sending */
 		/* Most UARTs need OUT2 to enable interrupts */
@@ -357,9 +357,9 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
 		/* Re-enable hardware flow control */
 		ktermios = tty->termios;
 		ktermios.c_cflag |= CRTSCTS;
-		status = tty_set_termios(tty, &ktermios);
+		tty_set_termios(tty, &ktermios);
 		BT_DBG("Enabling hardware flow control: %s",
-		       status ? "failed" : "success");
+		       !(tty->termios.c_cflag & CRTSCTS) ? "failed" : "success");
 	}
 }
 
-- 
2.30.2