From:   Maxim Korotkov <korotkov.maxim.s@gmail.com>
To:     Rasesh Mody <rmody@marvell.com>
Cc:     Maxim Korotkov <korotkov.maxim.s@gmail.com>,
        GR-Linux-NIC-Dev@marvell.com,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Michael Chan <mchan@broadcom.com>,
        Vadim Fedorenko <vadim.fedorenko@linux.dev>,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        lvc-project@linuxtesting.org
Subject: [PATCH net-next] bnx2: remove deadcode in bnx2_init_cpus()
Date:   Thu,  9 Mar 2023 20:42:31 +0300
Message-Id: <20230309174231.3135-1-korotkov.maxim.s@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The load_cpu_fw function has no error return code
and always returns zero. Checking the value returned by
this function does not make sense.
As a result, bnx2_init_cpus() will also return only zero
Therefore, it will be safe to change the type of functions
to void and remove checking

Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE

Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
---
 drivers/net/ethernet/broadcom/bnx2.c | 31 +++++++---------------------
 1 file changed, 8 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 9f473854b0f4..19b053c879b0 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -3829,7 +3829,7 @@ load_rv2p_fw(struct bnx2 *bp, u32 rv2p_proc,
 	return 0;
 }
 
-static int
+static void
 load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg,
 	    const struct bnx2_mips_fw_file_entry *fw_entry)
 {
@@ -3897,48 +3897,34 @@ load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg,
 	val &= ~cpu_reg->mode_value_halt;
 	bnx2_reg_wr_ind(bp, cpu_reg->state, cpu_reg->state_value_clear);
 	bnx2_reg_wr_ind(bp, cpu_reg->mode, val);
-
-	return 0;
 }
 
-static int
+static void
 bnx2_init_cpus(struct bnx2 *bp)
 {
 	const struct bnx2_mips_fw_file *mips_fw =
 		(const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
 	const struct bnx2_rv2p_fw_file *rv2p_fw =
 		(const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data;
-	int rc;
 
 	/* Initialize the RV2P processor. */
 	load_rv2p_fw(bp, RV2P_PROC1, &rv2p_fw->proc1);
 	load_rv2p_fw(bp, RV2P_PROC2, &rv2p_fw->proc2);
 
 	/* Initialize the RX Processor. */
-	rc = load_cpu_fw(bp, &cpu_reg_rxp, &mips_fw->rxp);
-	if (rc)
-		goto init_cpu_err;
+	load_cpu_fw(bp, &cpu_reg_rxp, &mips_fw->rxp);
 
 	/* Initialize the TX Processor. */
-	rc = load_cpu_fw(bp, &cpu_reg_txp, &mips_fw->txp);
-	if (rc)
-		goto init_cpu_err;
+	load_cpu_fw(bp, &cpu_reg_txp, &mips_fw->txp);
 
 	/* Initialize the TX Patch-up Processor. */
-	rc = load_cpu_fw(bp, &cpu_reg_tpat, &mips_fw->tpat);
-	if (rc)
-		goto init_cpu_err;
+	load_cpu_fw(bp, &cpu_reg_tpat, &mips_fw->tpat);
 
 	/* Initialize the Completion Processor. */
-	rc = load_cpu_fw(bp, &cpu_reg_com, &mips_fw->com);
-	if (rc)
-		goto init_cpu_err;
+	load_cpu_fw(bp, &cpu_reg_com, &mips_fw->com);
 
 	/* Initialize the Command Processor. */
-	rc = load_cpu_fw(bp, &cpu_reg_cp, &mips_fw->cp);
-
-init_cpu_err:
-	return rc;
+	load_cpu_fw(bp, &cpu_reg_cp, &mips_fw->cp);
 }
 
 static void
@@ -4951,8 +4937,7 @@ bnx2_init_chip(struct bnx2 *bp)
 	} else
 		bnx2_init_context(bp);
 
-	if ((rc = bnx2_init_cpus(bp)) != 0)
-		return rc;
+	bnx2_init_cpus(bp);
 
 	bnx2_init_nvram(bp);
 
-- 
2.37.2