Sender: Guenter Roeck <groeck7@gmail.com>
Date:   Fri, 10 Mar 2023 08:44:33 -0800
From:   Guenter Roeck <linux@roeck-us.net>
To:     Erik Ekman <erik@kryo.se>
Cc:     Jean Delvare <jdelvare@suse.com>, pauk.denis@gmail.com,
        ahmad@khalifa.ws, linux-hwmon@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH] hwmon: (nct6775) ASUS PRIME Z590 boards support
Message-ID: <ae1ddc06-941b-4f13-8f46-6188cad4aa2c@roeck-us.net>
References: <20230227090312.91091-1-erik@kryo.se>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20230227090312.91091-1-erik@kryo.se>
Precedence: bulk

On Mon, Feb 27, 2023 at 10:03:11AM +0100, Erik Ekman wrote:
> Tested on Z590M-PLUS.
> 
> dmesg log:
> nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
> 
> sensors output:
> nct6798-isa-0290
> Adapter: ISA adapter
> in0:                      672.00 mV (min =  +0.00 V, max =  +1.74 V)
> in1:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in2:                        3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> in3:                        3.28 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> in4:                        1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> in5:                      808.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in6:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in7:                        3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> in8:                        3.20 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> in9:                      528.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in10:                     672.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in11:                     528.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in12:                       1.21 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> in13:                     992.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
> in14:                       1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> fan1:                      971 RPM  (min =    0 RPM)
> fan2:                     1525 RPM  (min =    0 RPM)
> fan3:                        0 RPM  (min =    0 RPM)
> fan4:                     1094 RPM  (min =    0 RPM)
> fan5:                        0 RPM  (min =    0 RPM)
> fan6:                        0 RPM  (min =    0 RPM)
> fan7:                        0 RPM  (min =    0 RPM)
> SYSTIN:                    +36.0?C  (high = +80.0?C, hyst = +75.0?C)  sensor = thermistor
> CPUTIN:                    +40.0?C  (high = +80.0?C, hyst = +75.0?C)  sensor = thermistor
> AUXTIN0:                   +26.0?C    sensor = thermistor
> AUXTIN1:                    +8.0?C    sensor = thermistor
> AUXTIN2:                   +22.0?C    sensor = thermistor
> AUXTIN3:                   +25.0?C    sensor = thermistor
> PECI Agent 0 Calibration:  +40.0?C
> PCH_CHIP_CPU_MAX_TEMP:      +0.0?C
> PCH_CHIP_TEMP:             +55.0?C
> PCH_CPU_TEMP:               +0.0?C
> intrusion0:               OK
> intrusion1:               ALARM
> beep_enable:              disabled
> 
> Signed-off-by: Erik Ekman <erik@kryo.se>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/nct6775-platform.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
> index 76c6b564d7fc..1a00f4a542fe 100644
> --- a/drivers/hwmon/nct6775-platform.c
> +++ b/drivers/hwmon/nct6775-platform.c
> @@ -1122,6 +1122,9 @@ static const char * const asus_msi_boards[] = {
>  	"PRIME X670-P",
>  	"PRIME X670-P WIFI",
>  	"PRIME X670E-PRO WIFI",
> +	"PRIME Z590-A",
> +	"PRIME Z590-P",
> +	"PRIME Z590M-PLUS",
>  	"Pro B660M-C-D4",
>  	"ProArt B660-CREATOR D4",
>  	"ProArt X670E-CREATOR WIFI",