Message-ID: <c0abd0ea-98ce-2f42-043e-bcafdc157788@linaro.org>
Date:   Sun, 12 Mar 2023 12:16:18 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
Subject: Re: [PATCH v2 1/6] media: dt-bindings: Add bindings for JH7110 Camera
 Subsystem
Content-Language: en-US
To:     Jack Zhu <jack.zhu@starfivetech.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Maxime Ripard <mripard@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Robert Foss <rfoss@kernel.org>,
        Todor Tomov <todor.too@gmail.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>,
        Hans Verkuil <hverkuil-cisco@xs4all.nl>,
        Eugen Hristev <eugen.hristev@collabora.com>
Cc:     linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, changhuang.liang@starfivetech.com
References: <20230310120553.60586-1-jack.zhu@starfivetech.com>
 <20230310120553.60586-2-jack.zhu@starfivetech.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230310120553.60586-2-jack.zhu@starfivetech.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 10/03/2023 13:05, Jack Zhu wrote:
> Add the bindings documentation for Starfive JH7110 Camera Subsystem
> which is used for handing image sensor data.
> 
> Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>
> ---
>  .../bindings/media/starfive,jh7110-camss.yaml | 144 ++++++++++++++++++
>  1 file changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> new file mode 100644
> index 000000000000..3f348dd53441
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive SoC CAMSS ISP
> +
> +maintainers:
> +  - Jack Zhu <jack.zhu@starfivetech.com>
> +  - Changhuang Liang <changhuang.liang@starfivetech.com>
> +
> +description:
> +  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC.It
> +  consists of a VIN controller(Video In Controller, a top-level control until)
> +  and an ISP.
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-camss
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: syscon
> +      - const: isp
> +
> +  clocks:
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: apb_func
> +      - const: wrapper_clk_c
> +      - const: dvp_inv
> +      - const: axiwr
> +      - const: mipi_rx0_pxl
> +      - const: ispcore_2x
> +      - const: isp_axi
> +
> +  resets:
> +    maxItems: 6
> +
> +  reset-names:
> +    items:
> +      - const: wrapper_p
> +      - const: wrapper_c
> +      - const: axird
> +      - const: axiwr
> +      - const: isp_top_n
> +      - const: isp_top_axi
> +
> +  power-domains:
> +    items:
> +      - description: JH7110 ISP Power Domain Switch Controller.
> +
> +  interrupts:
> +    maxItems: 4
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:

You should have here port@0. The binding does not represent what is
supported by Linux. Binding represents hardware and you said you have
port@0 for the sensor.


> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +    required:
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    stfcamss: isp@19840000 {
> +        compatible = "starfive,jh7110-camss";
> +        reg = <0x19840000 0x10000>,
> +              <0x19870000 0x30000>;
> +        reg-names = "syscon", "isp";
> +        clocks = <&ispcrg 0>,
> +                 <&ispcrg 13>,
> +                 <&ispcrg 2>,
> +                 <&ispcrg 12>,
> +                 <&ispcrg 1>,
> +                 <&syscrg 51>,
> +                 <&syscrg 52>;
> +        clock-names = "apb_func",
> +                      "wrapper_clk_c",
> +                      "dvp_inv",
> +                      "axiwr",
> +                      "mipi_rx0_pxl",
> +                      "ispcore_2x",
> +                      "isp_axi";
> +        resets = <&ispcrg 0>,
> +                 <&ispcrg 1>,
> +                 <&ispcrg 10>,
> +                 <&ispcrg 11>,
> +                 <&syscrg 41>,
> +                 <&syscrg 42>;
> +        reset-names = "wrapper_p",
> +                      "wrapper_c",
> +                      "axird",
> +                      "axiwr",
> +                      "isp_top_n",
> +                      "isp_top_axi";
> +        power-domains = <&pwrc 5>;
> +        interrupts = <92>, <87>, <88>, <90>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +

Same here, DTS describes the hardware, so you need port@0.


Best regards,
Krzysztof