From:   Bartosz Golaszewski <brgl@bgdev.pl>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH 07/14] arm64: dts: qcom: sa8775p: add the Power On device node
Date:   Tue, 14 Mar 2023 19:30:36 +0100
Message-Id: <20230314183043.619997-8-brgl@bgdev.pl>
In-Reply-To: <20230314183043.619997-1-brgl@bgdev.pl>
References: <20230314183043.619997-1-brgl@bgdev.pl>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the PON node to PMIC #0 for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index 77e2515a7ab9..5d73212fbd16 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -12,6 +12,13 @@ pmk8775_0: pmic@0 {
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmk8775_0_pon: pon@1200 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1200>, <0x800>;
+			mode-recovery = <0x1>;
+			mode-bootloader = <0x2>;
+		};
 	};
 
 	pmk8775_1: pmic@2 {
-- 
2.37.2