Message-ID: <c45406e4-51e5-0df6-4b53-6355a56a0a34@linaro.org>
Date:   Tue, 14 Mar 2023 19:49:43 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
Subject: Re: [PATCH v5 2/3] arm: dts: nuvoton: npcm: Add sgpio feature
Content-Language: en-US
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Jim Liu <jim.t90615@gmail.com>, JJLIU0@nuvoton.com,
        KWLIU@nuvoton.com, linus.walleij@linaro.org, brgl@bgdev.pl,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc:     linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org
References: <20230314092311.8924-1-jim.t90615@gmail.com>
 <20230314092311.8924-3-jim.t90615@gmail.com>
 <5c38d97d-af2a-51b5-7b4d-bac69321e5ad@linaro.org>
In-Reply-To: <5c38d97d-af2a-51b5-7b4d-bac69321e5ad@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 14/03/2023 19:47, Krzysztof Kozlowski wrote:
> On 14/03/2023 10:23, Jim Liu wrote:
>> Add the SGPIO controller to the NPCM7xx devicetree
>>
>> Signed-off-by: Jim Liu <jim.t90615@gmail.com>
>> ---
>> Changes for v5:
>>    - remove npcm8xx node
>> Changes for v4:
>>    - add npcm8xx gpio node
>> Changes for v3:
>>    - modify node name
>>    - modify in/out property name
>> Changes for v2:
>>    - modify dts node
>> ---
>>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
>>  1 file changed, 30 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
>> index c7b5ef15b716..7f53774a01ec 100644
>> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
>> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
>> @@ -330,6 +330,36 @@
>>  				status = "disabled";
>>  			};
>>  
>> +			gpio8: gpio@101000 {
>> +				compatible = "nuvoton,npcm750-sgpio";
>> +				reg = <0x101000 0x200>;
>> +				clocks = <&clk NPCM7XX_CLK_APB3>;
>> +				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>> +				bus-frequency = <8000000>;
> 
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).

Eh, wrong key shortcut. Should be:

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

Best regards,
Krzysztof