Message-ID: <47f9e288-6c1b-6205-8538-303b65ff160d@gmail.com>
Date:   Wed, 15 Mar 2023 07:43:07 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
Content-Language: en-US, en-GB
To:     Sebastian Reichel <sre@kernel.org>
Cc:     Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        devicetree@vger.kernel.org
References: <20230314225535.1321736-1-sre@kernel.org>
 <20230314225535.1321736-2-sre@kernel.org>
From:   Matti Vaittinen <mazziesaccount@gmail.com>
Subject: Re: [PATCHv2 01/12] dt-bindings: power: supply: adc-battery: add
 binding
In-Reply-To: <20230314225535.1321736-2-sre@kernel.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 3/15/23 00:55, Sebastian Reichel wrote:
> Add binding for a battery that is only monitored via ADC
> channels and simple status GPIOs.
> 
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
>   .../bindings/power/supply/adc-battery.yaml    | 70 +++++++++++++++++++
>   1 file changed, 70 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/power/supply/adc-battery.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/adc-battery.yaml b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml
> new file mode 100644
> index 000000000000..ed9702caedff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/adc-battery.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADC battery
> +
> +maintainers:
> +  - Sebastian Reichel <sre@kernel.org>
> +
> +description:
> +  Basic battery capacity meter, which only reports basic battery data
> +  via ADC channels and optionally indicate that the battery is full by
> +  polling a GPIO line.
> +
> +  The voltage is expected to be measured between the battery terminals
> +  and mandatory. The optional current/power channel is expected to
> +  monitor the current/power flowing out of the battery. Last but not
> +  least the temperature channel is supposed to measure the battery
> +  temperature.

This looks very good to me. Even I fell under the illusion I know what 
these bindings mean and how the hardware looks like ;)

I am terrible with the bindings syntax so this is not worth much but:
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>

Yours,
	-- Matti

-- 
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland

~~ When things go utterly wrong vim users can always type :help! ~~