From:   Julien Panis <jpanis@baylibre.com>
To:     lee@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, corbet@lwn.net, arnd@arndb.de,
        gregkh@linuxfoundation.org, derek.kiernan@xilinx.com,
        dragan.cvetic@xilinx.com
Cc:     eric.auger@redhat.com, jgg@ziepe.ca, razor@blackwall.org,
        stephen@networkplumber.org, davem@davemloft.net,
        christian.koenig@amd.com, contact@emersion.fr,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-doc@vger.kernel.org, sterzik@ti.com, u-kumar1@ti.com,
        eblanc@baylibre.com, jneanne@baylibre.com
Subject: [PATCH v2 0/4] TI TPS6594 PMIC support (Core, ESM, PFSM)
Date:   Wed, 15 Mar 2023 12:07:32 +0100
Message-Id: <20230315110736.35506-1-jpanis@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

TPS6594 is a Power Management IC which provides regulators and others
features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can
communicate through the I2C or SPI interfaces.
TPS6594 is the super-set device while TPS6593 and LP8764X are derivatives.

This series adds support to TI TPS6594 PMIC and its derivatives.

The features implemented in this series are:
- Core (MFD I2C and SPI entry points)
- ESM (child device)
- PFSM (child device)

- Core description:
I2C and SPI interface protocols are implemented, with and without
the bit-integrity error detection feature (CRC mode).
In multi-PMIC configuration, all instances share a single GPIO of
the SoC to generate interrupt requests via their respective nINT
output pin.

- ESM description:
This device monitors the SoC error output signal at its nERR_SOC
input pin. In error condition, ESM toggles its nRSTOUT_SOC pin
to reset the SoC.
Basically, ESM driver starts ESM hardware.

- PFSM description:
Strictly speaking, PFSM is not hardware. It is a piece of code.
PMIC integrates a state machine which manages operational modes.
Depending on the current operational mode, some voltage domains
remain energized while others can be off.
PFSM driver can be used to trigger transitions between configured
states.

Link to v1:
https://lore.kernel.org/all/20230216114410.183489-1-jpanis@baylibre.com/

Others series will be submitted over the next few weeks, providing
drivers for others child devices like GPIOs (pinctrl), RTC, and
regulators. Board support will also be added (device trees).

Julien Panis (4):
  dt-bindings: mfd: Add TI TPS6594 PMIC
  mfd: tps6594: Add driver for TI TPS6594 PMIC
  misc: tps6594-esm: Add driver for TI TPS6594 ESM
  misc: tps6594-pfsm: Add driver for TI TPS6594 PFSM

 .../devicetree/bindings/mfd/ti,tps6594.yaml   |  191 +++
 .../userspace-api/ioctl/ioctl-number.rst      |    1 +
 drivers/mfd/Kconfig                           |   32 +
 drivers/mfd/Makefile                          |    3 +
 drivers/mfd/tps6594-core.c                    |  453 ++++++++
 drivers/mfd/tps6594-i2c.c                     |  244 ++++
 drivers/mfd/tps6594-spi.c                     |  129 +++
 drivers/misc/Kconfig                          |   23 +
 drivers/misc/Makefile                         |    2 +
 drivers/misc/tps6594-esm.c                    |  132 +++
 drivers/misc/tps6594-pfsm.c                   |  304 +++++
 include/linux/mfd/tps6594.h                   | 1020 +++++++++++++++++
 include/uapi/linux/tps6594_pfsm.h             |   45 +
 13 files changed, 2579 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
 create mode 100644 drivers/mfd/tps6594-core.c
 create mode 100644 drivers/mfd/tps6594-i2c.c
 create mode 100644 drivers/mfd/tps6594-spi.c
 create mode 100644 drivers/misc/tps6594-esm.c
 create mode 100644 drivers/misc/tps6594-pfsm.c
 create mode 100644 include/linux/mfd/tps6594.h
 create mode 100644 include/uapi/linux/tps6594_pfsm.h


base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6
-- 
2.37.3