Message-ID: <71b16513-49b1-d9b3-b0b9-4c47e68563ba@kwiboo.se>
Date:   Thu, 16 Mar 2023 07:37:18 +0000 (UTC)
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
Subject: Re: [PATCH 4/5] arm64: dts: rockchip: fix gmac support for NanoPi R5S
References: <20230315160228.2362-1-cnsztl@gmail.com>
 <20230315160228.2362-5-cnsztl@gmail.com>
 <CA+E=qVei7T4T0FWhdUFnr5JbCWSgFbGLcmU2OHxx54yvnNR6mw@mail.gmail.com>
 <CAOP2_TiU815F528jVGvDbcg3kSG+ykepU-ZYz7VWMO84GgcwMg@mail.gmail.com>
Content-Language: en-US
From:   Jonas Karlman <jonas@kwiboo.se>
In-Reply-To: <CAOP2_TiU815F528jVGvDbcg3kSG+ykepU-ZYz7VWMO84GgcwMg@mail.gmail.com>
To:     Tianling Shen <cnsztl@gmail.com>,
        Vasily Khoruzhick <anarsoul@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiko Stuebner <heiko@sntech.de>,
        Jagan Teki <jagan@amarulasolutions.com>,
        Peter Geis <pgwipeout@gmail.com>, Andy Yan <andyshrk@163.com>,
        Brian Norris <briannorris@chromium.org>,
        Chris Morgan <macromorgan@hotmail.com>,
        Sebastian Reichel <sebastian.reichel@collabora.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Michael Riesch <michael.riesch@wolfvision.net>,
        Maya Matuszczyk <maccraft123mc@gmail.com>,
        Andrew Powers-Holmes <aholmes@omnom.net>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi Tianling,
On 2023-03-16 06:34, Tianling Shen wrote:
> Hi Vasily,
> 
> On Thu, Mar 16, 2023 at 8:16 AM Vasily Khoruzhick <anarsoul@gmail.com> wrote:
>>
>> On Wed, Mar 15, 2023 at 9:02 AM Tianling Shen <cnsztl@gmail.com> wrote:
>>>
>>> - Changed phy-mode to rgmii.
>>>
>>> - Fixed pull type in pinctrl for gmac0.
>>>
>>> - Removed duplicate properties in mdio node.
>>>   These properties are defined in the gmac0 node already.
>>>
>>> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
>>> ---
>>>  arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
>>>  1 file changed, 2 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> index e9adf5e66529..2a1118f15c29 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> @@ -57,7 +57,7 @@
>>>         assigned-clock-rates = <0>, <125000000>;
>>>         clock_in_out = "output";
>>>         phy-handle = <&rgmii_phy0>;
>>> -       phy-mode = "rgmii-id";
>>> +       phy-mode = "rgmii";
>>>         pinctrl-names = "default";
>>>         pinctrl-0 = <&gmac0_miim
>>>                      &gmac0_tx_bus2
>>> @@ -79,9 +79,6 @@
>>>                 reg = <1>;
>>>                 pinctrl-0 = <&eth_phy0_reset_pin>;
>>>                 pinctrl-names = "default";
>>> -               reset-assert-us = <10000>;
>>> -               reset-deassert-us = <50000>;
>>> -               reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
>>
>> Hmm, I don't see RK_PC4 being used anywhere else. gmac0 has RK_PC5 as
> 
> Yes, it's a typo, it should be RK_RC5.
> 
>> snsp,reset-gpio. So it essentially drops reset for the PHY. Is it
>> expected?
> 
> snsp,reset-gpio defined reset already, so we don't need to set it here again.
> 
> ---
> 
> snsp,reset-gpio is the legacy binding, but I still have no idea why
> reset-gpios doesn't work,
> the dwmac driver will fail to lookup phy:
> 
> [   10.398514] rk_gmac-dwmac fe2a0000.ethernet eth0: no phy found
> [   10.399061] rk_gmac-dwmac fe2a0000.ethernet eth0: __stmmac_open:
> Cannot attach to PHY (error: -19)
> 
> Any ideas would be appreciated.

Generic ethernet phy driver is not resetting the phy in the same way
that snsp,reset-gpio does, please see top two commits at [1].

I have been meaning to send that out as an RFC but I got stuck in a
u-boot rabbit hole, and I also do not know what the correct way to fix
this would be, so I played with both device tree and code changes.
Will prioritize this and send out a RFC later today.

[1] https://github.com/Kwiboo/linux-rockchip/commits/rk3568-eth-phy-reset

Regards,
Jonas

> 
> Thanks,
> Tianling.
> 
>>
>>>         };
>>>  };
>>>
>>> @@ -115,7 +112,7 @@
>>>  &pinctrl {
>>>         gmac0 {
>>>                 eth_phy0_reset_pin: eth-phy0-reset-pin {
>>> -                       rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>>> +                       rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
>>>                 };
>>>         };
>>>
>>> --
>>> 2.17.1
>>>