From:   Frank Li <Frank.Li@nxp.com>
To:     shawnguo@kernel.org
Cc:     Frank.Li@nxp.com, devicetree@vger.kernel.org, festevam@gmail.com,
        imx@lists.linux.dev, kernel@pengutronix.de,
        krzysztof.kozlowski+dt@linaro.org,
        linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
        linux-kernel@vger.kernel.org, robh+dt@kernel.org,
        s.hauer@pengutronix.de
Subject: [PATCH v2 2/3] arm64: dts: imx8qxp: add cadence usb3 support
Date:   Thu, 16 Mar 2023 17:27:10 -0400
Message-Id: <20230316212712.2426542-3-Frank.Li@nxp.com>
In-Reply-To: <20230316212712.2426542-1-Frank.Li@nxp.com>
References: <20230316212712.2426542-1-Frank.Li@nxp.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?v4kX3oBiahiDYe+IQM0P+i51xlOdxa91Ylv+8CxAxclAf2mt/qb5Tgyi8x9W?=
 =?us-ascii?Q?OTNPJjBxOURDD2XmGQldJ7o7IkkmJfHBwKhwRCAtGVTh7QggRxs8up9RsC4X?=
 =?us-ascii?Q?7xeMPicY6wKi7AbLLUweta8+MQ2f8Cjyeq+tvDXAZm1OgRx1SWVQkX54oCbn?=
 =?us-ascii?Q?9+1sbDIK//ZoXVN91n7drtDZwlmoTPJmvb3HRjuwOATRzcOHK02urnkRqvkM?=
 =?us-ascii?Q?r2HhRwA3Q9exnWFjozZ+8j/XvoS1fGbldHqUioYtkfz0AhMek/IkrPv2sc6f?=
 =?us-ascii?Q?bDPiLYeQZU8TdVQ/4PO1fsCedMJUmD9XfDyyifog8xETY/eD7hxIHmWOVqip?=
 =?us-ascii?Q?A6u1L4yyBuyr9nH/RVprRENcSDe4ffUvHqwZ/huCZo/kjGhMt3VfDdh8aAzj?=
 =?us-ascii?Q?ulDvk+zBnAtlmwobe8/UrDlm8D+KoNdyvHufazy17xB9TVmThmVTeXYs0ax4?=
 =?us-ascii?Q?nDR+jqZbvZ2etoRlorJDX/asY8ZyawJYORyeL5dRcI4uHurzQ3xsmoe3F+US?=
 =?us-ascii?Q?dvljIAIfn9ax8j2bwbmYrnc8LUg1+YWDpaOzbHWvETD7jazfb6JPO2GR4t7q?=
 =?us-ascii?Q?p+MfKRgi8OHLgRw/jiwyt0+719vf3ZI7IT0Ipy2pasLzAKRHApkC/CDXdAVC?=
 =?us-ascii?Q?OJ+0lNltnOBEFFfvyK69M7hXayrPgG13w9zrhsdmTGIMnxWylLMpBNU2q+6D?=
 =?us-ascii?Q?dCMl4rWuOFjw++1YM9IzszWeShlOB6LdqmIjRgAlOM8s1ySuWTDO0jnAjgJv?=
 =?us-ascii?Q?wq6iwkP8jMnaI2ZS8qCECdfx12/KQk0/Wkzwb5ILA6YatuqlRNNH8N1R5/ZX?=
 =?us-ascii?Q?tawsPPPfGvgi24iHXbtwq16I8UNzfPROx6zpsmdbN+Jft+3tohAhyi8aKxq0?=
 =?us-ascii?Q?f8zk9E8NdtZDmUGb7QRda48F54MggvnhkZDhHbTRGKtwHiIL8bl/oRHhpsI7?=
 =?us-ascii?Q?D0EubhJnYZCC7E2Bks2D1vqiAotvvqhq9W3k3WNRWzGLLZcV/6RST4Cw1yZk?=
 =?us-ascii?Q?1LNtJwyX7Fa1kXTufOlEJrz1bHDlK+ZILzWdN7hmywpjiaPw2LLxxm+C/jCu?=
 =?us-ascii?Q?SDjERT1eVta6317v7NMdZahI0fuYbQeoKu1pgAOaYYjuVTTG+Za+hcHkhUCv?=
 =?us-ascii?Q?0zGlkAclWYcYZ/sW+JB0wPphjDXbrqukz0WJUQ2MH+qswWYRrrlH5EC6jSZq?=
 =?us-ascii?Q?3vUov3R7UX08TFmMlPjfLd64j5aJgIECKSQ9N2bpz8BG1Fj6NSFg1Wp7+eEn?=
 =?us-ascii?Q?GAiXQOzVDBx+so2/IzqsnuhVi9OVG4TLndct3qXiRAA7irkDfRH1lNeeE1Os?=
 =?us-ascii?Q?xsH3hPpLVG96Bgj47BBCkthWLI/8qZCX8LC6xIAxw2SdihTebN1ni7rKAk/M?=
 =?us-ascii?Q?bP6RWKreQ0IEkdXEy1OZKKtxjBKMhAu/soZMJheorsZ+3TKHqv5cLknP+Msc?=
 =?us-ascii?Q?bDFjwvQkWbYFIkrxQ4rl58zD/Hjrj8KZG9WsJl4/ugjBGANghVlHR3UasjSM?=
 =?us-ascii?Q?SpcW6eUYaxllMB7JgkmTQUCTDXFVLzzW0+B8lhatjyLn+UMdi3p1/VXJ/GdN?=
 =?us-ascii?Q?044X1wKYEHKO1H0/ECmLkr7GpZIcBN/TeD01S6dZ?=
X-OriginatorOrg: nxp.com
X-MS-Exchange-CrossTenant-Network-Message-Id: 2a283db7-6b10-4199-da1d-08db26654340
X-MS-Exchange-CrossTenant-AuthSource: AM6PR04MB4838.eurprd04.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 16 Mar 2023 21:27:36.6495
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: 3p3lFkyvuCtcYjifa6AQH3v85wTKeePqAo6TuFLmh+aOrIfvgRHzcvUClDg6KqQyg+skduxiIKCp06TOcb2fIQ==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM8PR04MB7332
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

There are cadence usb3.0 controller in 8qxp and 8qm.
Add usb3 node at common connect subsystem.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 4852760adeee..389f52f16a5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -138,6 +138,56 @@ fec2: ethernet@5b050000 {
 		status = "disabled";
 	};
 
+	usbotg3: usb@5b110000 {
+		compatible = "fsl,imx8qm-usb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0x5b110000 0x10000>;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+			 <&usb3_lpcg IMX_LPCG_CLK_0>,
+			 <&usb3_lpcg IMX_LPCG_CLK_7>,
+			 <&usb3_lpcg IMX_LPCG_CLK_4>,
+			 <&usb3_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "usb3_lpm_clk", "usb3_bus_clk", "usb3_aclk",
+			      "usb3_ipg_clk", "usb3_core_pclk";
+		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+				  <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <125000000>, <12000000>, <250000000>;
+		power-domains = <&pd IMX_SC_R_USB_2>;
+		status = "disabled";
+
+		usbotg3_cdns3: usb@5b120000 {
+			compatible = "cdns,usb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg", "wakeup";
+			reg = <0x5b130000 0x10000>,     /* memory area for HOST registers */
+			      <0x5b140000 0x10000>,   /* memory area for DEVICE registers */
+			      <0x5b120000 0x10000>;   /* memory area for OTG/DRD registers */
+			reg-names = "xhci", "dev", "otg";
+			phys = <&usb3_phy>;
+			phy-names = "cdns3,usb3-phy";
+			status = "disabled";
+		};
+	};
+
+	usb3_phy: usb-phy@5b160000 {
+		compatible = "nxp,salvo-phy";
+		reg = <0x5b160000 0x40000>;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_6>;
+		clock-names = "salvo_phy_clk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	/* LPCG clocks */
 	sdhc0_lpcg: clock-controller@5b200000 {
 		compatible = "fsl,imx8qxp-lpcg";
@@ -234,4 +284,26 @@ usb2_lpcg: clock-controller@5b270000 {
 		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 	};
+
+	usb3_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		clock-output-names = "usb3_app_clk",
+				     "usb3_lpm_clk",
+				     "usb3_ipg_clk",
+				     "usb3_core_pclk",
+				     "usb3_phy_clk",
+				     "usb3_aclk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+	};
 };
-- 
2.34.1