Received-SPF: Pass (protection.outlook.com: domain of amd.com designates
 165.204.84.17 as permitted sender) receiver=protection.outlook.com;
 client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C
From:   Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
To:     Mark Brown <broonie@kernel.org>
CC:     <linux-spi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <git@amd.com>, <saikrishna12468@gmail.com>,
        Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Subject: [PATCH 2/2] spi: cadence-quadspi: Disable the SPI before reconfiguring
Date:   Mon, 20 Mar 2023 15:29:31 +0530
Message-ID: <20230320095931.2651714-3-sai.krishna.potthuri@amd.com>
In-Reply-To: <20230320095931.2651714-1-sai.krishna.potthuri@amd.com>
References: <20230320095931.2651714-1-sai.krishna.potthuri@amd.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 20 Mar 2023 10:03:30.1963
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: c77c9134-e28f-4ffe-3565-08db292a5b82
X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB04.amd.com]
X-MS-Exchange-CrossTenant-AuthSource: CO1NAM11FT078.eop-nam11.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: SJ0PR12MB5405
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Observed random DMA timeout failures while doing back to back
transfers which involves switching the modes from DMA to NON-DMA.
This issue is observed while testing the OSPI+UBIFS file system test case
where rootfs is mounted from OSPI UBIFS partition.
To avoid this issue, disable the SPI before changing the configuration
from external DMA to NON-DMA and vice versa and reenable it after changing
the configuration.
As per the Cadence Octal SPI design specification, it is recommended to
disable the Octal-SPI enable bit before reconfiguring.

Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
---
 drivers/spi/spi-cadence-quadspi.c | 38 +++++++++++++++++++------------
 1 file changed, 23 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index e281732aba91..d4a2b72985da 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -791,6 +791,21 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 	return ret;
 }
 
+static void cqspi_controller_enable(struct cqspi_st *cqspi, bool enable)
+{
+	void __iomem *reg_base = cqspi->iobase;
+	unsigned int reg;
+
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+
+	if (enable)
+		reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
+	else
+		reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
+
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+}
+
 static int cqspi_versal_indirect_read_dma(struct cqspi_flash_pdata *f_pdata,
 					  u_char *rxbuf, loff_t from_addr,
 					  size_t n_rx)
@@ -815,10 +830,14 @@ static int cqspi_versal_indirect_read_dma(struct cqspi_flash_pdata *f_pdata,
 	if (ret)
 		return ret;
 
+	cqspi_controller_enable(cqspi, 0);
+
 	reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
 	reg |= CQSPI_REG_CONFIG_DMA_MASK;
 	writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
 
+	cqspi_controller_enable(cqspi, 1);
+
 	dma_addr = dma_map_single(dev, rxbuf, bytes_to_dma, DMA_FROM_DEVICE);
 	if (dma_mapping_error(dev, dma_addr)) {
 		dev_err(dev, "dma mapping failed\n");
@@ -876,10 +895,14 @@ static int cqspi_versal_indirect_read_dma(struct cqspi_flash_pdata *f_pdata,
 	       cqspi->iobase + CQSPI_REG_INDIRECTRD);
 	dma_unmap_single(dev, dma_addr, bytes_to_dma, DMA_FROM_DEVICE);
 
+	cqspi_controller_enable(cqspi, 0);
+
 	reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
 	reg &= ~CQSPI_REG_CONFIG_DMA_MASK;
 	writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
 
+	cqspi_controller_enable(cqspi, 1);
+
 	ret = zynqmp_pm_ospi_mux_select(cqspi->pd_dev_id,
 					PM_OSPI_MUX_SEL_LINEAR);
 	if (ret)
@@ -1182,21 +1205,6 @@ static void cqspi_readdata_capture(struct cqspi_st *cqspi,
 	writel(reg, reg_base + CQSPI_REG_READCAPTURE);
 }
 
-static void cqspi_controller_enable(struct cqspi_st *cqspi, bool enable)
-{
-	void __iomem *reg_base = cqspi->iobase;
-	unsigned int reg;
-
-	reg = readl(reg_base + CQSPI_REG_CONFIG);
-
-	if (enable)
-		reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
-	else
-		reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
-
-	writel(reg, reg_base + CQSPI_REG_CONFIG);
-}
-
 static void cqspi_configure(struct cqspi_flash_pdata *f_pdata,
 			    unsigned long sclk)
 {
-- 
2.25.1