Message-ID: <0f183988-f100-c4ff-056e-a737767a772d@linaro.org>
Date:   Mon, 20 Mar 2023 11:43:51 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
From:   Neil Armstrong <neil.armstrong@linaro.org>
Reply-To: neil.armstrong@linaro.org
Subject: Re: [PATCH] drm/bridge: nwl-dsi: implement
 MIPI_DSI_MODE_NO_EOT_PACKET
Content-Language: en-US
To:     Kevin Groeneveld <kgroeneveld@lenbrook.com>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        Robert Foss <rfoss@kernel.org>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
References: <20230318223357.3899-1-kgroeneveld@lenbrook.com>
Organization: Linaro Developer Services
In-Reply-To: <20230318223357.3899-1-kgroeneveld@lenbrook.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

On 18/03/2023 23:33, Kevin Groeneveld wrote:
> Previously EOT packets were only being enabled when
> MIPI_DSI_CLOCK_NON_CONTINUOUS was set in the dsi_mode_flags. However this
> really should be based on MIPI_DSI_MODE_NO_EOT_PACKET instead.
> 
> Some displays require EOT packets and a continuous clock which was an
> impossible combination to achieve with the current driver.
> 
> Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>


Thanks for the patch, can you provide a Fixes tag ?

Neil

> ---
>   drivers/gpu/drm/bridge/nwl-dsi.c | 13 +++++--------
>   1 file changed, 5 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
> index 6dc2a4e191d7..bb8404ffd3f5 100644
> --- a/drivers/gpu/drm/bridge/nwl-dsi.c
> +++ b/drivers/gpu/drm/bridge/nwl-dsi.c
> @@ -211,7 +211,7 @@ static u32 us2lp(u32 lp_clk_rate, unsigned long us)
>   
>   static int nwl_dsi_config_host(struct nwl_dsi *dsi)
>   {
> -	u32 cycles;
> +	u32 val, cycles;
>   	struct phy_configure_opts_mipi_dphy *cfg = &dsi->phy_cfg.mipi_dphy;
>   
>   	if (dsi->lanes < 1 || dsi->lanes > 4)
> @@ -220,13 +220,8 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
>   	DRM_DEV_DEBUG_DRIVER(dsi->dev, "DSI Lanes %d\n", dsi->lanes);
>   	nwl_dsi_write(dsi, NWL_DSI_CFG_NUM_LANES, dsi->lanes - 1);
>   
> -	if (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
> -		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x01);
> -		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x01);
> -	} else {
> -		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x00);
> -		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x00);
> -	}
> +	val = (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0x01 : 0x00;
> +	nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, val);
>   
>   	/* values in byte clock cycles */
>   	cycles = ui2bc(cfg->clk_pre);
> @@ -241,6 +236,8 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
>   	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap: 0x%x\n", cycles);
>   	nwl_dsi_write(dsi, NWL_DSI_CFG_TX_GAP, cycles);
>   
> +	val = (dsi->dsi_mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET) ? 0x00 : 0x01;
> +	nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, val);
>   	nwl_dsi_write(dsi, NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP, 0x01);
>   	nwl_dsi_write(dsi, NWL_DSI_CFG_HTX_TO_COUNT, 0x00);
>   	nwl_dsi_write(dsi, NWL_DSI_CFG_LRX_H_TO_COUNT, 0x00);