Date:   Tue, 21 Mar 2023 11:34:07 +0300
From:   Serge Semin <fancer.lancer@gmail.com>
To:     Cai Huoqing <cai.huoqing@linux.dev>
Cc:     Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
        Vinod Koul <vkoul@kernel.org>,
        Jingoo Han <jingoohan1@gmail.com>,
        Lorenzo Pieralisi <lpieralisi@kernel.org>,
        Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>,
        Rob Herring <robh@kernel.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
        linux-pci@vger.kernel.org
Subject: Re: [PATCH v7 0/5] dmaengine: dw-edma: Add support for native HDMA
Message-ID: <20230321083407.5gc432ttjhwbi2um@mobilestation>
References: <20230315012840.6986-1-cai.huoqing@linux.dev>
 <20230320121401.zkcjbqmghzacpffh@mobilestation>
 <ZBkXEzoZZlIy18xB@chq-MS-7D45>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <ZBkXEzoZZlIy18xB@chq-MS-7D45>
Precedence: bulk

On Tue, Mar 21, 2023 at 10:31:47AM +0800, Cai Huoqing wrote:
> On 20 3月 23 15:14:01, Serge Semin wrote:
> > Hi Cai
> > 
> > On Wed, Mar 15, 2023 at 09:28:31AM +0800, Cai Huoqing wrote:
> > > Add support for HDMA NATIVE, as long the IP design has set
> > > the compatible register map parameter-HDMA_NATIVE,
> > > which allows compatibility for native HDMA register configuration.
> > > 
> > > The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
> > > And the native HDMA registers are different from eDMA,
> > > so this patch add support for HDMA NATIVE mode.
> > > 
> > > HDMA write and read channels operate independently to maximize
> > > the performance of the HDMA read and write data transfer over
> > > the link When you configure the HDMA with multiple read channels,
> > > then it uses a round robin (RR) arbitration scheme to select
> > > the next read channel to be serviced.The same applies when
> > > youhave multiple write channels.
> > > 
> > > The native HDMA driver also supports a maximum of 16 independent
> > > channels (8 write + 8 read), which can run simultaneously.
> > > Both SAR (Source Address Register) and DAR (Destination Address Register)
> > > are aligned to byte.
> > 
> > It seems like we are getting towards the series finalization. I'll
> > test it out on my HW after v8 is submitted. Meanwhile could you please
> > clarify whether you have a real device with DW HDMA engine on board?
> 

> Our hardware is an AI Accelerartor(PCIE Card).
> 
> The device pci.ids is 1d22:3864
> in https://github.com/pciutils/pciids/blob/master/pci.ids
> line 24737,
> 
> "1d22  Baidu Technology
>         3684  Kunlun AI Accelerator
>         3685  Kunlun2 AI Accelerator [VF]"
> 
> And our device driver is not ready to upstream(will cost serveral
> 
> months to port DRM etc.),

Ok. Thanks for clarification. Could you please add me to the Cc-list of
the AI-accelerator patch when it's ready to be submitted for review. I am
not that familiar with the DRM-part, but would like to have a look at
the DMA-related code.

-Serge(y)

> 
> but I have taken this DW eDMA core into our driver test.
> 
> Thanks
> Cai-
> 
> > You keep submitting the DW eDMA driver core update, but there is no
> > glue-driver or low-level device driver patch for a real device which
> > would set the EDMA_MF_HDMA_NATIVE mapping.
> > 
> > -Serge(y)
> > 
> > > 
> > > Cai Huoqing (2):
> > >   dmaengine: dw-edma: Add support for native HDMA
> > >   dmaengine: dw-edma: Optimization in dw_edma_v0_core_handle_int
> > > 
> > > Cai huoqing (3):
> > >   dmaengine: dw-edma: Rename dw_edma_core_ops structure to
> > >     dw_edma_plat_ops
> > >   dmaengine: dw-edma: Create a new dw_edma_core_ops structure to
> > >     abstract controller operation
> > >   dmaengine: dw-edma: Add HDMA DebugFS support
> > > 
> > > v6->v7:
> > >   [1/5]
> > >   1.Update the commit log.
> > >   [2/5]
> > >   2.Revert dw_edma_core_handle_int back to dw-edma-core.h.
> > >   3.Fix code style.
> > >   [3/5]
> > >   4.Move the change of register file from patch[4/5] to patch[3/5].
> > >   5.Fix code style.
> > > 
> > > v6 link:
> > >   https://lore.kernel.org/lkml/20230310032342.17395-1-cai.huoqing@linux.dev/
> > > 
> > >  drivers/dma/dw-edma/Makefile                 |   8 +-
> > >  drivers/dma/dw-edma/dw-edma-core.c           |  86 ++----
> > >  drivers/dma/dw-edma/dw-edma-core.h           |  58 ++++
> > >  drivers/dma/dw-edma/dw-edma-pcie.c           |   4 +-
> > >  drivers/dma/dw-edma/dw-edma-v0-core.c        |  91 ++++--
> > >  drivers/dma/dw-edma/dw-edma-v0-core.h        |  14 +-
> > >  drivers/dma/dw-edma/dw-hdma-v0-core.c        | 277 +++++++++++++++++++
> > >  drivers/dma/dw-edma/dw-hdma-v0-core.h        |  17 ++
> > >  drivers/dma/dw-edma/dw-hdma-v0-debugfs.c     | 176 ++++++++++++
> > >  drivers/dma/dw-edma/dw-hdma-v0-debugfs.h     |  22 ++
> > >  drivers/dma/dw-edma/dw-hdma-v0-regs.h        | 130 +++++++++
> > >  drivers/pci/controller/dwc/pcie-designware.c |   2 +-
> > >  include/linux/dma/edma.h                     |   7 +-
> > >  13 files changed, 785 insertions(+), 107 deletions(-)
> > >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.c
> > >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.h
> > >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.c
> > >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.h
> > >  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-regs.h
> > > 
> > > -- 
> > > 2.34.1
> > >