From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     linux-amlogic@lists.infradead.org
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        neil.armstrong@linaro.org,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v1 0/3] ARM: dts: Enable WiFi and Bluetooth support on MXIII-Plus
Date:   Tue, 21 Mar 2023 18:12:10 +0100
Message-Id: <20230321171213.2808460-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

MXIII-Plus comes with a Ampak AP6330 Bluetooth and WiFi combo chip.
The 32kHz clock is provided by the SoC and is enabled by simply using
the correct pin mux.
Also this is the first board which uses the SDXC_A for connecting to
the SDIO chip.

Other than the two new pin muxes this is just a matter of describing
the hardware in meson8m2-mxiii-plus.dts.


Martin Blumenstingl (3):
  ARM: dts: meson8: add the xtal_32k_out pin
  ARM: dts: meson8: add the SDXC_A pins
  ARM: dts: meson8m2: mxiii-plus: Enable Bluetooth and WiFi support

 arch/arm/boot/dts/meson8.dtsi             | 17 ++++++++
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 48 ++++++++++++++++++++++-
 2 files changed, 64 insertions(+), 1 deletion(-)

-- 
2.40.0