Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [RESEND PATCH 0/4] arm64: dts: qcom: Use proper WSA881x shutdown GPIO polarity
Date:   Wed, 22 Mar 2023 20:30:47 +0100
Message-Id: <20230322193051.826167-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

Resending after all dependencies got merged.  The DTS changes are not
compatible with kernel older than v6.3-rc1 (where the driver changes were
merged).

Description
===========
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux driver were updated to
handle proper flag, correct the DTS.

Best regards,
Krzysztof

Krzysztof Kozlowski (4):
  arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown
    GPIO polarity
  arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown
    GPIO polarity
  arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO
    polarity
  arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO
    polarity

 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts             | 4 ++--
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
 arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts     | 4 ++--
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts              | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)

-- 
2.34.1