Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [RESEND PATCH 1/4] arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Date:   Wed, 22 Mar 2023 20:30:48 +0100
Message-Id: <20230322193051.826167-2-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230322193051.826167-1-krzysztof.kozlowski@linaro.org>
References: <20230322193051.826167-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 67d2a663ce75..5c688cb6a7ce 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -753,7 +753,7 @@ swm: swm@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -761,7 +761,7 @@ left_spkr: speaker@0,3 {
 
 		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
-- 
2.34.1