Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <cf87e7c0-b769-d1fc-0718-c5c2986993b8@linaro.org>
Date:   Wed, 22 Mar 2023 22:59:37 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.0
Subject: Re: [PATCH v3 4/6] dt-bindings: sound: Add support for the Lantiq
 PEF2256 codec
Content-Language: en-US
To:     Herve Codina <herve.codina@bootlin.com>,
        Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc:     linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        alsa-devel@alsa-project.org,
        Christophe Leroy <christophe.leroy@csgroup.eu>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>
References: <20230322134654.219957-1-herve.codina@bootlin.com>
 <20230322134654.219957-5-herve.codina@bootlin.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230322134654.219957-5-herve.codina@bootlin.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 22/03/2023 14:46, Herve Codina wrote:
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
> 
> The codec support allows to use some of the PCM system highway
> time-slots as audio channels to transport audio data over the E1/T1/J1
> lines.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
>  .../bindings/sound/lantiq,pef2256-codec.yaml  | 54 +++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml b/Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml
> new file mode 100644
> index 000000000000..da35b70cda99
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/lantiq,pef2256-codec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lantiq PEF2256 codec
> +
> +maintainers:
> +  - Herve Codina <herve.codina@bootlin.com>
> +
> +description: |
> +  Codec support for PEF2256.
> +
> +  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
> +  line interface component designed to fulfill all required interfacing between
> +  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
> +
> +  The codec support allows to use some of the PCM system highway time-slots as
> +  audio channels to transport audio data over the E1/T1/J1 lines.
> +
> +  The time-slots used by the codec must be set and so, the properties
> +  'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
> +  'dai-tdm-slot-rx-mask' must be present in the ALSA sound card node for
> +  sub-nodes that involve the codec. The codec uses 8bit time-slots.
> +  'dai-tdm-tdm-slot-with' must be set to 8.
> +  The tx and rx masks define the PEF2256 time-slots assigned to the codec.
> +
> +  The PEF2256 codec node should be a child of a PEF2256 node.
> +  Refer to the bindings described in
> +  Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: lantiq,pef2256-codec
> +
> +  '#sound-dai-cells':
> +    const: 0

You do not have here any resources, so the entire binding can be dropped
and merged into the parent.

Best regards,
Krzysztof