Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 04/11] arm64: dts: qcom: sc7180-idp: use just "port" in panel
Date:   Sun, 26 Mar 2023 17:57:46 +0200
Message-Id: <20230326155753.92007-4-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230326155753.92007-1-krzysztof.kozlowski@linaro.org>
References: <20230326155753.92007-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7180-idp.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
  sc7180-idp.dtb: panel@0: 'port' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index c3bdd3295c02..fcabbc6a897f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -312,14 +312,9 @@ panel@0 {
 
 		reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				panel0_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};
-- 
2.34.1