Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 27 Mar 2023 09:48:55 +0800
From:   Shawn Guo <shawnguo@kernel.org>
To:     Martin Kepplinger <martin.kepplinger@puri.sm>
Cc:     robh@kernel.org, krzysztof.kozlowski@linaro.org,
        s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com,
        kernel@puri.sm, linux-imx@nxp.com, devicetree@vger.kernel.org,
        phone-devel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 00/14] arm64: dts: imx8mq-librem5: updates and fixes
 until march 2023
Message-ID: <20230327014855.GA3364759@dragon>
References: <20230309204608.237605-1-martin.kepplinger@puri.sm>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230309204608.237605-1-martin.kepplinger@puri.sm>
Precedence: bulk

On Thu, Mar 09, 2023 at 09:45:54PM +0100, Martin Kepplinger wrote:
> hi Shawn and all interested in the Librem 5 phone,
> 
> This is another round of updates to the phone DT description. Some are
> clear fixes, but some are important updates like the CSI changes
> that make the selfie cam work or the powersaving related things like
> the ddrc opp table entry and voltage changes.
> 
> As previously this is all mixed together because the changes are small.
> If you prefer separate, small "topic-patchsets", please say so.
> 
> thanks,
>                            martin
> 
> 
> Angus Ainslie (1):
>   arm64: dts: imx8mq-librem5: add the magnetometer mount matrix
> 
> Martin Kepplinger (4):
>   arm64: dts: imx8mq-librem5: lower the mipi csi 1 frequencies
>   arm64: dts: imx8mq-librem5: describe the clock for the csi sensors
>   arm64: dts: imx8mq-librem5: fix audio-1v8 regulator name
>   arm64: dts: imx8mq-librem5: add brightness levels to led-backlight
> 
> Sebastian Krzyszkowiak (9):
>   arm64: dts: imx8mq-librem5: Describe MIC_2V4 regulator
>   arm64: dts: imx8mq-librem5: Set charger parameters for each batch
>   arm64: dts: imx8mq-librem5: Set the DVS voltages lower
>   arm64: dts: imx8mq-librem5: Bump usdhc2 frequency to 100MHz
>   arm64: dts: imx8mq-librem5: Adjust proximity sensor's near levels
>   arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0
>   arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V
>   arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz
>   arm64: dts: imx8mq-librem5: Add 166MHz to DDRC OPP table

Applied all, thanks!