Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Dylan Van Assche <me@dylanvanassche.be>
To:     Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc:     Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        Banajit Goswami <bgoswami@quicinc.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>, alsa-devel@alsa-project.org,
        linux-kernel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Dylan Van Assche <me@dylanvanassche.be>
Subject: [PATCH v4] sound: soc: qcom: sdm845: expose ALSA control for jack
Date:   Mon, 27 Mar 2023 19:36:27 +0200
Message-Id: <20230327173627.361533-1-me@dylanvanassche.be>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Qualcomm SDM845 features a headphone jack via a Qualcomm WCD9340
codec which has jack detection through the wcd-mbhc-v2 driver.
Jack detection is currently fully functional via the input
interface together with multimedia buttons, but is not exposed
as an ALSA control. Therefore, ALSA clients such as PulseAudio [1]
do not pick up the jack detection events as they only support
one of the possible interface (ALSA control or input interface,
but not both). Initialize the audio jack with snd_soc_card_jack_new_pins
instead of snd_soc_card_jack_new to make the jack also available as
an ALSA control.

[1] https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1377

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---

Changes in v4:

- Dropped cover letter because of a single patch.
- Reworked as a patch to the SDM845 Machine driver as suggested
  by Mark Brown.

Changes in v3:

- Improved cover letter
- Added Tested-by from
https://lore.kernel.org/alsa-devel/20221007155716.10594-1-me@dylanvanassche.be/
- Properly added maintainers for sending this patch

Kind regards,
Dylan Van Assche

 sound/soc/qcom/sdm845.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 02612af714a8..95888c5079a0 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -44,6 +44,14 @@ struct sdm845_snd_data {
 
 static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
 
+static struct snd_soc_jack_pin sdm845_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = (SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | SND_JACK_HEADSET |
+			 SND_JACK_MECHANICAL)
+	},
+};
+
 static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
 				     struct snd_pcm_hw_params *params)
 {
@@ -242,12 +250,13 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
 
 
 	if (!pdata->jack_setup) {
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
+		rval = snd_soc_card_jack_new_pins(card, "Headset Jack",
 				SND_JACK_HEADSET |
 				SND_JACK_HEADPHONE |
 				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
 				SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				&pdata->jack);
+				&pdata->jack, sdm845_jack_pins,
+				ARRAY_SIZE(sdm845_jack_pins));
 
 		if (rval < 0) {
 			dev_err(card->dev, "Unable to add Headphone Jack\n");
-- 
2.39.2