Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20230328-soc-mailbox-v1-0-3953814532fd@marcan.st> <20230328-soc-mailbox-v1-4-3953814532fd@marcan.st>
In-Reply-To: <20230328-soc-mailbox-v1-4-3953814532fd@marcan.st>
From:   Eric Curtin <ecurtin@redhat.com>
Date:   Tue, 28 Mar 2023 14:37:06 +0100
Message-ID: <CAOgh=FxM15CUX_fLHpUruHiYam9QK6Z8G6MQGHDc-=eCQ5KBbw@mail.gmail.com>
Subject: Re: [PATCH 4/5] mailbox: apple: Delete driver
To:     Hector Martin <marcan@marcan.st>
Cc:     Sven Peter <sven@svenpeter.dev>,
        Alyssa Rosenzweig <alyssa@rosenzweig.io>,
        Jassi Brar <jassisinghbrar@gmail.com>,
        Janne Grunau <j@jannau.net>, linux-kernel@vger.kernel.org,
        asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Tue, 28 Mar 2023 at 14:21, Hector Martin <marcan@marcan.st> wrote:
>
> This driver is now orphaned and superseded by
> drivers/soc/apple/mailbox.c.
>
> Signed-off-by: Hector Martin <marcan@marcan.st>

Watched the stream

Acked-by: Eric Curtin <ecurtin@redhat.com>

Is mise le meas/Regards,

Eric Curtin

> ---
>  MAINTAINERS                     |   2 -
>  drivers/mailbox/Kconfig         |  12 --
>  drivers/mailbox/Makefile        |   2 -
>  drivers/mailbox/apple-mailbox.c | 441 ----------------------------------------
>  include/linux/apple-mailbox.h   |  19 --
>  5 files changed, 476 deletions(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8d5bc223f305..c115e0ad41da 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1966,7 +1966,6 @@ F:        drivers/i2c/busses/i2c-pasemi-platform.c
>  F:     drivers/iommu/apple-dart.c
>  F:     drivers/iommu/io-pgtable-dart.c
>  F:     drivers/irqchip/irq-apple-aic.c
> -F:     drivers/mailbox/apple-mailbox.c
>  F:     drivers/nvme/host/apple.c
>  F:     drivers/nvmem/apple-efuses.c
>  F:     drivers/pinctrl/pinctrl-apple-gpio.c
> @@ -1974,7 +1973,6 @@ F:        drivers/soc/apple/*
>  F:     drivers/watchdog/apple_wdt.c
>  F:     include/dt-bindings/interrupt-controller/apple-aic.h
>  F:     include/dt-bindings/pinctrl/apple.h
> -F:     include/linux/apple-mailbox.h
>  F:     include/linux/soc/apple/*
>
>  ARM/APPLE MACHINE SOUND DRIVERS
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index 1495965bc394..73952108cc52 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -8,18 +8,6 @@ menuconfig MAILBOX
>
>  if MAILBOX
>
> -config APPLE_MAILBOX
> -       tristate "Apple Mailbox driver"
> -       depends on ARCH_APPLE || (ARM64 && COMPILE_TEST)
> -       default ARCH_APPLE
> -       help
> -         Apple SoCs have various co-processors required for certain
> -         peripherals to work (NVMe, display controller, etc.). This
> -         driver adds support for the mailbox controller used to
> -         communicate with those.
> -
> -         Say Y here if you have a Apple SoC.
> -
>  config ARM_MHU
>         tristate "ARM MHU Mailbox"
>         depends on ARM_AMBA
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index fc9376117111..18793e6caa2f 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -60,5 +60,3 @@ obj-$(CONFIG_SUN6I_MSGBOX)    += sun6i-msgbox.o
>  obj-$(CONFIG_SPRD_MBOX)                += sprd-mailbox.o
>
>  obj-$(CONFIG_QCOM_IPCC)                += qcom-ipcc.o
> -
> -obj-$(CONFIG_APPLE_MAILBOX)    += apple-mailbox.o
> diff --git a/drivers/mailbox/apple-mailbox.c b/drivers/mailbox/apple-mailbox.c
> deleted file mode 100644
> index 2a3e8d8ff8b5..000000000000
> --- a/drivers/mailbox/apple-mailbox.c
> +++ /dev/null
> @@ -1,441 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Apple mailbox driver
> - *
> - * Copyright (C) 2021 The Asahi Linux Contributors
> - *
> - * This driver adds support for two mailbox variants (called ASC and M3 by
> - * Apple) found in Apple SoCs such as the M1. It consists of two FIFOs used to
> - * exchange 64+32 bit messages between the main CPU and a co-processor.
> - * Various coprocessors implement different IPC protocols based on these simple
> - * messages and shared memory buffers.
> - *
> - * Both the main CPU and the co-processor see the same set of registers but
> - * the first FIFO (A2I) is always used to transfer messages from the application
> - * processor (us) to the I/O processor and the second one (I2A) for the
> - * other direction.
> - */
> -
> -#include <linux/apple-mailbox.h>
> -#include <linux/delay.h>
> -#include <linux/device.h>
> -#include <linux/gfp.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/mailbox_controller.h>
> -#include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/platform_device.h>
> -#include <linux/spinlock.h>
> -#include <linux/types.h>
> -
> -#define APPLE_ASC_MBOX_CONTROL_FULL  BIT(16)
> -#define APPLE_ASC_MBOX_CONTROL_EMPTY BIT(17)
> -
> -#define APPLE_ASC_MBOX_A2I_CONTROL 0x110
> -#define APPLE_ASC_MBOX_A2I_SEND0   0x800
> -#define APPLE_ASC_MBOX_A2I_SEND1   0x808
> -#define APPLE_ASC_MBOX_A2I_RECV0   0x810
> -#define APPLE_ASC_MBOX_A2I_RECV1   0x818
> -
> -#define APPLE_ASC_MBOX_I2A_CONTROL 0x114
> -#define APPLE_ASC_MBOX_I2A_SEND0   0x820
> -#define APPLE_ASC_MBOX_I2A_SEND1   0x828
> -#define APPLE_ASC_MBOX_I2A_RECV0   0x830
> -#define APPLE_ASC_MBOX_I2A_RECV1   0x838
> -
> -#define APPLE_M3_MBOX_CONTROL_FULL  BIT(16)
> -#define APPLE_M3_MBOX_CONTROL_EMPTY BIT(17)
> -
> -#define APPLE_M3_MBOX_A2I_CONTROL 0x50
> -#define APPLE_M3_MBOX_A2I_SEND0          0x60
> -#define APPLE_M3_MBOX_A2I_SEND1          0x68
> -#define APPLE_M3_MBOX_A2I_RECV0          0x70
> -#define APPLE_M3_MBOX_A2I_RECV1          0x78
> -
> -#define APPLE_M3_MBOX_I2A_CONTROL 0x80
> -#define APPLE_M3_MBOX_I2A_SEND0          0x90
> -#define APPLE_M3_MBOX_I2A_SEND1          0x98
> -#define APPLE_M3_MBOX_I2A_RECV0          0xa0
> -#define APPLE_M3_MBOX_I2A_RECV1          0xa8
> -
> -#define APPLE_M3_MBOX_IRQ_ENABLE       0x48
> -#define APPLE_M3_MBOX_IRQ_ACK          0x4c
> -#define APPLE_M3_MBOX_IRQ_A2I_EMPTY    BIT(0)
> -#define APPLE_M3_MBOX_IRQ_A2I_NOT_EMPTY BIT(1)
> -#define APPLE_M3_MBOX_IRQ_I2A_EMPTY    BIT(2)
> -#define APPLE_M3_MBOX_IRQ_I2A_NOT_EMPTY BIT(3)
> -
> -#define APPLE_MBOX_MSG1_OUTCNT GENMASK(56, 52)
> -#define APPLE_MBOX_MSG1_INCNT  GENMASK(51, 48)
> -#define APPLE_MBOX_MSG1_OUTPTR GENMASK(47, 44)
> -#define APPLE_MBOX_MSG1_INPTR  GENMASK(43, 40)
> -#define APPLE_MBOX_MSG1_MSG    GENMASK(31, 0)
> -
> -struct apple_mbox_hw {
> -       unsigned int control_full;
> -       unsigned int control_empty;
> -
> -       unsigned int a2i_control;
> -       unsigned int a2i_send0;
> -       unsigned int a2i_send1;
> -
> -       unsigned int i2a_control;
> -       unsigned int i2a_recv0;
> -       unsigned int i2a_recv1;
> -
> -       bool has_irq_controls;
> -       unsigned int irq_enable;
> -       unsigned int irq_ack;
> -       unsigned int irq_bit_recv_not_empty;
> -       unsigned int irq_bit_send_empty;
> -};
> -
> -struct apple_mbox {
> -       void __iomem *regs;
> -       const struct apple_mbox_hw *hw;
> -
> -       int irq_recv_not_empty;
> -       int irq_send_empty;
> -
> -       struct mbox_chan chan;
> -
> -       struct device *dev;
> -       struct mbox_controller controller;
> -       spinlock_t rx_lock;
> -};
> -
> -static const struct of_device_id apple_mbox_of_match[];
> -
> -static bool apple_mbox_hw_can_send(struct apple_mbox *apple_mbox)
> -{
> -       u32 mbox_ctrl =
> -               readl_relaxed(apple_mbox->regs + apple_mbox->hw->a2i_control);
> -
> -       return !(mbox_ctrl & apple_mbox->hw->control_full);
> -}
> -
> -static bool apple_mbox_hw_send_empty(struct apple_mbox *apple_mbox)
> -{
> -       u32 mbox_ctrl =
> -               readl_relaxed(apple_mbox->regs + apple_mbox->hw->a2i_control);
> -
> -       return mbox_ctrl & apple_mbox->hw->control_empty;
> -}
> -
> -static int apple_mbox_hw_send(struct apple_mbox *apple_mbox,
> -                             struct apple_mbox_msg *msg)
> -{
> -       if (!apple_mbox_hw_can_send(apple_mbox))
> -               return -EBUSY;
> -
> -       dev_dbg(apple_mbox->dev, "> TX %016llx %08x\n", msg->msg0, msg->msg1);
> -
> -       writeq_relaxed(msg->msg0, apple_mbox->regs + apple_mbox->hw->a2i_send0);
> -       writeq_relaxed(FIELD_PREP(APPLE_MBOX_MSG1_MSG, msg->msg1),
> -                      apple_mbox->regs + apple_mbox->hw->a2i_send1);
> -
> -       return 0;
> -}
> -
> -static bool apple_mbox_hw_can_recv(struct apple_mbox *apple_mbox)
> -{
> -       u32 mbox_ctrl =
> -               readl_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_control);
> -
> -       return !(mbox_ctrl & apple_mbox->hw->control_empty);
> -}
> -
> -static int apple_mbox_hw_recv(struct apple_mbox *apple_mbox,
> -                             struct apple_mbox_msg *msg)
> -{
> -       if (!apple_mbox_hw_can_recv(apple_mbox))
> -               return -ENOMSG;
> -
> -       msg->msg0 = readq_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_recv0);
> -       msg->msg1 = FIELD_GET(
> -               APPLE_MBOX_MSG1_MSG,
> -               readq_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_recv1));
> -
> -       dev_dbg(apple_mbox->dev, "< RX %016llx %08x\n", msg->msg0, msg->msg1);
> -
> -       return 0;
> -}
> -
> -static int apple_mbox_chan_send_data(struct mbox_chan *chan, void *data)
> -{
> -       struct apple_mbox *apple_mbox = chan->con_priv;
> -       struct apple_mbox_msg *msg = data;
> -       int ret;
> -
> -       ret = apple_mbox_hw_send(apple_mbox, msg);
> -       if (ret)
> -               return ret;
> -
> -       /*
> -        * The interrupt is level triggered and will keep firing as long as the
> -        * FIFO is empty. It will also keep firing if the FIFO was empty
> -        * at any point in the past until it has been acknowledged at the
> -        * mailbox level. By acknowledging it here we can ensure that we will
> -        * only get the interrupt once the FIFO has been cleared again.
> -        * If the FIFO is already empty before the ack it will fire again
> -        * immediately after the ack.
> -        */
> -       if (apple_mbox->hw->has_irq_controls) {
> -               writel_relaxed(apple_mbox->hw->irq_bit_send_empty,
> -                              apple_mbox->regs + apple_mbox->hw->irq_ack);
> -       }
> -       enable_irq(apple_mbox->irq_send_empty);
> -
> -       return 0;
> -}
> -
> -static irqreturn_t apple_mbox_send_empty_irq(int irq, void *data)
> -{
> -       struct apple_mbox *apple_mbox = data;
> -
> -       /*
> -        * We don't need to acknowledge the interrupt at the mailbox level
> -        * here even if supported by the hardware. It will keep firing but that
> -        * doesn't matter since it's disabled at the main interrupt controller.
> -        * apple_mbox_chan_send_data will acknowledge it before enabling
> -        * it at the main controller again.
> -        */
> -       disable_irq_nosync(apple_mbox->irq_send_empty);
> -       mbox_chan_txdone(&apple_mbox->chan, 0);
> -       return IRQ_HANDLED;
> -}
> -
> -static int apple_mbox_poll(struct apple_mbox *apple_mbox)
> -{
> -       struct apple_mbox_msg msg;
> -       int ret = 0;
> -
> -       while (apple_mbox_hw_recv(apple_mbox, &msg) == 0) {
> -               mbox_chan_received_data(&apple_mbox->chan, (void *)&msg);
> -               ret++;
> -       }
> -
> -       /*
> -        * The interrupt will keep firing even if there are no more messages
> -        * unless we also acknowledge it at the mailbox level here.
> -        * There's no race if a message comes in between the check in the while
> -        * loop above and the ack below: If a new messages arrives inbetween
> -        * those two the interrupt will just fire again immediately after the
> -        * ack since it's level triggered.
> -        */
> -       if (apple_mbox->hw->has_irq_controls) {
> -               writel_relaxed(apple_mbox->hw->irq_bit_recv_not_empty,
> -                              apple_mbox->regs + apple_mbox->hw->irq_ack);
> -       }
> -
> -       return ret;
> -}
> -
> -static irqreturn_t apple_mbox_recv_irq(int irq, void *data)
> -{
> -       struct apple_mbox *apple_mbox = data;
> -
> -       spin_lock(&apple_mbox->rx_lock);
> -       apple_mbox_poll(apple_mbox);
> -       spin_unlock(&apple_mbox->rx_lock);
> -
> -       return IRQ_HANDLED;
> -}
> -
> -static bool apple_mbox_chan_peek_data(struct mbox_chan *chan)
> -{
> -       struct apple_mbox *apple_mbox = chan->con_priv;
> -       unsigned long flags;
> -       int ret;
> -
> -       spin_lock_irqsave(&apple_mbox->rx_lock, flags);
> -       ret = apple_mbox_poll(apple_mbox);
> -       spin_unlock_irqrestore(&apple_mbox->rx_lock, flags);
> -
> -       return ret > 0;
> -}
> -
> -static int apple_mbox_chan_flush(struct mbox_chan *chan, unsigned long timeout)
> -{
> -       struct apple_mbox *apple_mbox = chan->con_priv;
> -       unsigned long deadline = jiffies + msecs_to_jiffies(timeout);
> -
> -       while (time_before(jiffies, deadline)) {
> -               if (apple_mbox_hw_send_empty(apple_mbox)) {
> -                       mbox_chan_txdone(&apple_mbox->chan, 0);
> -                       return 0;
> -               }
> -
> -               udelay(1);
> -       }
> -
> -       return -ETIME;
> -}
> -
> -static int apple_mbox_chan_startup(struct mbox_chan *chan)
> -{
> -       struct apple_mbox *apple_mbox = chan->con_priv;
> -
> -       /*
> -        * Only some variants of this mailbox HW provide interrupt control
> -        * at the mailbox level. We therefore need to handle enabling/disabling
> -        * interrupts at the main interrupt controller anyway for hardware that
> -        * doesn't. Just always keep the interrupts we care about enabled at
> -        * the mailbox level so that both hardware revisions behave almost
> -        * the same.
> -        */
> -       if (apple_mbox->hw->has_irq_controls) {
> -               writel_relaxed(apple_mbox->hw->irq_bit_recv_not_empty |
> -                                      apple_mbox->hw->irq_bit_send_empty,
> -                              apple_mbox->regs + apple_mbox->hw->irq_enable);
> -       }
> -
> -       enable_irq(apple_mbox->irq_recv_not_empty);
> -       return 0;
> -}
> -
> -static void apple_mbox_chan_shutdown(struct mbox_chan *chan)
> -{
> -       struct apple_mbox *apple_mbox = chan->con_priv;
> -
> -       disable_irq(apple_mbox->irq_recv_not_empty);
> -}
> -
> -static const struct mbox_chan_ops apple_mbox_ops = {
> -       .send_data = apple_mbox_chan_send_data,
> -       .peek_data = apple_mbox_chan_peek_data,
> -       .flush = apple_mbox_chan_flush,
> -       .startup = apple_mbox_chan_startup,
> -       .shutdown = apple_mbox_chan_shutdown,
> -};
> -
> -static struct mbox_chan *apple_mbox_of_xlate(struct mbox_controller *mbox,
> -                                            const struct of_phandle_args *args)
> -{
> -       if (args->args_count != 0)
> -               return ERR_PTR(-EINVAL);
> -
> -       return &mbox->chans[0];
> -}
> -
> -static int apple_mbox_probe(struct platform_device *pdev)
> -{
> -       int ret;
> -       const struct of_device_id *match;
> -       char *irqname;
> -       struct apple_mbox *mbox;
> -       struct device *dev = &pdev->dev;
> -
> -       match = of_match_node(apple_mbox_of_match, pdev->dev.of_node);
> -       if (!match)
> -               return -EINVAL;
> -       if (!match->data)
> -               return -EINVAL;
> -
> -       mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
> -       if (!mbox)
> -               return -ENOMEM;
> -       platform_set_drvdata(pdev, mbox);
> -
> -       mbox->dev = dev;
> -       mbox->regs = devm_platform_ioremap_resource(pdev, 0);
> -       if (IS_ERR(mbox->regs))
> -               return PTR_ERR(mbox->regs);
> -
> -       mbox->hw = match->data;
> -       mbox->irq_recv_not_empty =
> -               platform_get_irq_byname(pdev, "recv-not-empty");
> -       if (mbox->irq_recv_not_empty < 0)
> -               return -ENODEV;
> -
> -       mbox->irq_send_empty = platform_get_irq_byname(pdev, "send-empty");
> -       if (mbox->irq_send_empty < 0)
> -               return -ENODEV;
> -
> -       mbox->controller.dev = mbox->dev;
> -       mbox->controller.num_chans = 1;
> -       mbox->controller.chans = &mbox->chan;
> -       mbox->controller.ops = &apple_mbox_ops;
> -       mbox->controller.txdone_irq = true;
> -       mbox->controller.of_xlate = apple_mbox_of_xlate;
> -       mbox->chan.con_priv = mbox;
> -       spin_lock_init(&mbox->rx_lock);
> -
> -       irqname = devm_kasprintf(dev, GFP_KERNEL, "%s-recv", dev_name(dev));
> -       if (!irqname)
> -               return -ENOMEM;
> -
> -       ret = devm_request_threaded_irq(dev, mbox->irq_recv_not_empty, NULL,
> -                                       apple_mbox_recv_irq,
> -                                       IRQF_NO_AUTOEN | IRQF_ONESHOT, irqname,
> -                                       mbox);
> -       if (ret)
> -               return ret;
> -
> -       irqname = devm_kasprintf(dev, GFP_KERNEL, "%s-send", dev_name(dev));
> -       if (!irqname)
> -               return -ENOMEM;
> -
> -       ret = devm_request_irq(dev, mbox->irq_send_empty,
> -                              apple_mbox_send_empty_irq, IRQF_NO_AUTOEN,
> -                              irqname, mbox);
> -       if (ret)
> -               return ret;
> -
> -       return devm_mbox_controller_register(dev, &mbox->controller);
> -}
> -
> -static const struct apple_mbox_hw apple_mbox_asc_hw = {
> -       .control_full = APPLE_ASC_MBOX_CONTROL_FULL,
> -       .control_empty = APPLE_ASC_MBOX_CONTROL_EMPTY,
> -
> -       .a2i_control = APPLE_ASC_MBOX_A2I_CONTROL,
> -       .a2i_send0 = APPLE_ASC_MBOX_A2I_SEND0,
> -       .a2i_send1 = APPLE_ASC_MBOX_A2I_SEND1,
> -
> -       .i2a_control = APPLE_ASC_MBOX_I2A_CONTROL,
> -       .i2a_recv0 = APPLE_ASC_MBOX_I2A_RECV0,
> -       .i2a_recv1 = APPLE_ASC_MBOX_I2A_RECV1,
> -
> -       .has_irq_controls = false,
> -};
> -
> -static const struct apple_mbox_hw apple_mbox_m3_hw = {
> -       .control_full = APPLE_M3_MBOX_CONTROL_FULL,
> -       .control_empty = APPLE_M3_MBOX_CONTROL_EMPTY,
> -
> -       .a2i_control = APPLE_M3_MBOX_A2I_CONTROL,
> -       .a2i_send0 = APPLE_M3_MBOX_A2I_SEND0,
> -       .a2i_send1 = APPLE_M3_MBOX_A2I_SEND1,
> -
> -       .i2a_control = APPLE_M3_MBOX_I2A_CONTROL,
> -       .i2a_recv0 = APPLE_M3_MBOX_I2A_RECV0,
> -       .i2a_recv1 = APPLE_M3_MBOX_I2A_RECV1,
> -
> -       .has_irq_controls = true,
> -       .irq_enable = APPLE_M3_MBOX_IRQ_ENABLE,
> -       .irq_ack = APPLE_M3_MBOX_IRQ_ACK,
> -       .irq_bit_recv_not_empty = APPLE_M3_MBOX_IRQ_I2A_NOT_EMPTY,
> -       .irq_bit_send_empty = APPLE_M3_MBOX_IRQ_A2I_EMPTY,
> -};
> -
> -static const struct of_device_id apple_mbox_of_match[] = {
> -       { .compatible = "apple,asc-mailbox-v4", .data = &apple_mbox_asc_hw },
> -       { .compatible = "apple,m3-mailbox-v2", .data = &apple_mbox_m3_hw },
> -       {}
> -};
> -MODULE_DEVICE_TABLE(of, apple_mbox_of_match);
> -
> -static struct platform_driver apple_mbox_driver = {
> -       .driver = {
> -               .name = "apple-mailbox",
> -               .of_match_table = apple_mbox_of_match,
> -       },
> -       .probe = apple_mbox_probe,
> -};
> -module_platform_driver(apple_mbox_driver);
> -
> -MODULE_LICENSE("Dual MIT/GPL");
> -MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
> -MODULE_DESCRIPTION("Apple Mailbox driver");
> diff --git a/include/linux/apple-mailbox.h b/include/linux/apple-mailbox.h
> deleted file mode 100644
> index 720fbb70294a..000000000000
> --- a/include/linux/apple-mailbox.h
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
> -/*
> - * Apple mailbox message format
> - *
> - * Copyright (C) 2021 The Asahi Linux Contributors
> - */
> -
> -#ifndef _LINUX_APPLE_MAILBOX_H_
> -#define _LINUX_APPLE_MAILBOX_H_
> -
> -#include <linux/types.h>
> -
> -/* encodes a single 96bit message sent over the single channel */
> -struct apple_mbox_msg {
> -       u64 msg0;
> -       u32 msg1;
> -};
> -
> -#endif
>
> --
> 2.40.0
>
>