Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Valentin Caron <valentin.caron@foss.st.com>
To:     Alexandre Torgue <alexandre.torgue@foss.st.com>
CC:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Valentin Caron <valentin.caron@foss.st.com>,
        <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 4/6] ARM: dts: stm32: add uart nodes on stm32mp13
Date:   Tue, 28 Mar 2023 17:37:21 +0200
Message-ID: <20230328153723.498672-5-valentin.caron@foss.st.com>
In-Reply-To: <20230328153723.498672-1-valentin.caron@foss.st.com>
References: <20230328153723.498672-1-valentin.caron@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Update device-tree stm32mp131.dtsi to add some uart features.

On uart 1, 2, 3, 5, 6, 7, 8 nodes, add compabible, exti interrupts, clock,
reset properties, dma config.

On uart 4 node, only add dma configuration and use exti interrupt.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
---
 arch/arm/boot/dts/stm32mp131.dtsi | 97 ++++++++++++++++++++++++++++++-
 1 file changed, 96 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 5949473cbbfd..9ea61687f023 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -397,12 +397,42 @@ spdifrx: audio-controller@4000d000 {
 			status = "disabled";
 		};
 
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x5>,
+			       <&dmamux1 46 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
 			resets = <&rcc UART4_R>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x5>,
+			       <&dmamux1 64 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x5>,
+			       <&dmamux1 66 0x400 0x1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -442,6 +472,32 @@ i2c2: i2c@40013000 {
 			status = "disabled";
 		};
 
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x5>,
+			       <&dmamux1 80 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x5>,
+			       <&dmamux1 82 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timers1: timer@44000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -524,6 +580,19 @@ counter {
 			};
 		};
 
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x5>,
+			       <&dmamux1 72 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s1: audio-controller@44004000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@ usbotg_hs: usb@49000000 {
 			status = "disabled";
 		};
 
+		usart1: serial@4c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c000000 0x400>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			wakeup-source;
+			dmas = <&dmamux1 41 0x400 0x5>,
+			       <&dmamux1 42 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usart2: serial@4c001000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c001000 0x400>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
+			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x5>,
+			       <&dmamux1 44 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s4: audio-controller@4c002000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x4c002000 0x400>;
-- 
2.25.1